OCUBA - Overclocking Utilities and Benchmarking Applications
- Thread starter Aaron
- Start date
http://www.cpuid.com/cpuz.php
* Intel Atom Z500/Z510/Z520/Z530/Z540 processors.
* Intel Core 2 Duo E7x00 processor.
* AMD 45 nm Phenom (Dened & Shanghai) processors.
* Intel P45 chipset.
Exe file properties
* MD5 (cpuz.exe 1.45) : DD4E540C04297CF93DC721166C13446E
Download
* Intel Atom Z500/Z510/Z520/Z530/Z540 processors.
* Intel Core 2 Duo E7x00 processor.
* AMD 45 nm Phenom (Dened & Shanghai) processors.
* Intel P45 chipset.
Exe file properties
* MD5 (cpuz.exe 1.45) : DD4E540C04297CF93DC721166C13446E
Download
- Joined
- Nov 20, 2003
- Messages
- 81,183
Core Temp 0.99 Final {18.05.2008}
What's new?:
- Fix: Incorrect recognition of 45nm Mobile Intel CPUs.
- Fix: CPU temperature not displayed in Core Temp window on Phenom CPUs (0.98 and 0.98.1).
- Fix: CPU load would sometimes display -1% load.
- Fix: AMD K8 would sometimes spike to 206C, the false reading is now ignored.
- Fix: AMD K8 sometimes constantly reads -49C.
- Fix: Core Temp does not show up automatically on G15 LCD with 2.02 driver.
- Fix: Shared memory structure was not properly filled on multiprocessor systems.
- Fix: System tray setting "Show highest temperature of each CPU" only displays one temperature reading in a multi CPU system.
- Fix: Certain problems with font resizing should now be fixed.
- Fix: G15 LCD would not update after using soft buttons.
- Fix: On temperature display mode change, high and low records were not reset.
- Fix: Changing the reading interval in settings did not actually update, restart of Core Temp was needed to apply the change.
- Fix: Incorrect VID detection on 45nm desktop Intel parts.
- Add: Shared memory - developers now have access to Core Temp data.
- Add: Register dump to text file function.
- Add: Preliminary Atom (Silverthorne) support - Untested.
- Add: Support for Intel Core 2 Duo E7000 45nm series.
- Add: Option to show a single icon instead of temperature in the system tray.
- Add: Custom font and size for G15 LCD screen or simply use the built in compact font and layout. (via Settings.ini)
- Change: Improved detection of L2 cache on Intel chips for more accurate recognition.
- Change: Rewritten temperature calculation to fix problems with shared memory.
- Change: Default G15 LCD text layout and font changed.
- Change: Doesn't create a log file containing session start and end times if logging is disabled.
- Change: Settings.ini file is automatically created with default settings in case one doesn't already exist.
Download: http://www.alcpu.com/CoreTemp/CoreTemp.zip
What's new?:
- Fix: Incorrect recognition of 45nm Mobile Intel CPUs.
- Fix: CPU temperature not displayed in Core Temp window on Phenom CPUs (0.98 and 0.98.1).
- Fix: CPU load would sometimes display -1% load.
- Fix: AMD K8 would sometimes spike to 206C, the false reading is now ignored.
- Fix: AMD K8 sometimes constantly reads -49C.
- Fix: Core Temp does not show up automatically on G15 LCD with 2.02 driver.
- Fix: Shared memory structure was not properly filled on multiprocessor systems.
- Fix: System tray setting "Show highest temperature of each CPU" only displays one temperature reading in a multi CPU system.
- Fix: Certain problems with font resizing should now be fixed.
- Fix: G15 LCD would not update after using soft buttons.
- Fix: On temperature display mode change, high and low records were not reset.
- Fix: Changing the reading interval in settings did not actually update, restart of Core Temp was needed to apply the change.
- Fix: Incorrect VID detection on 45nm desktop Intel parts.
- Add: Shared memory - developers now have access to Core Temp data.
- Add: Register dump to text file function.
- Add: Preliminary Atom (Silverthorne) support - Untested.
- Add: Support for Intel Core 2 Duo E7000 45nm series.
- Add: Option to show a single icon instead of temperature in the system tray.
- Add: Custom font and size for G15 LCD screen or simply use the built in compact font and layout. (via Settings.ini)
- Change: Improved detection of L2 cache on Intel chips for more accurate recognition.
- Change: Rewritten temperature calculation to fix problems with shared memory.
- Change: Default G15 LCD text layout and font changed.
- Change: Doesn't create a log file containing session start and end times if logging is disabled.
- Change: Settings.ini file is automatically created with default settings in case one doesn't already exist.
Download: http://www.alcpu.com/CoreTemp/CoreTemp.zip
- Joined
- Jun 5, 2005
- Messages
- 594
Real Temp - New temp program for Intel Core processors
http://www.xtremesystems.org/forums/showthread.php?t=179044
Russ
http://www.xtremesystems.org/forums/showthread.php?t=179044
Russ
- Joined
- Nov 20, 2003
- Messages
- 81,183
What Is MAXON CINEBENCH?
CINEBENCH is a real-world test suite that assesses your computer's performace capabilities. MAXON CINEBENCH is based on MAXON's award-winning animation software, CINEMA 4D, which is used extensively by studios and production houses worldwide for 3D content creation. MAXON software has been used in blockbuster movies such as Spider-Man, Star Wars, The Chronicles of Narnia and many more.
MAXON CINEBENCH runs several tests on your computer to measure the performance of the main processor and the graphics card under real world circumstances. The benchmark application makes use of up to 16 CPUs or CPU cores and is available for Windows (32-bit and 64-Bit) and Macintosh (PPC and Intel-based).
The resulting values among different operating systems are 100% comparable and therefore very useful with regard to purchasing decision-making. It can also be used as a marketing tool for hardware vendors or simply to compare hardware among colleagues or friends.
Details and download: http://www.maxon.net/pages/download/cinebench_e.html
CINEBENCH is a real-world test suite that assesses your computer's performace capabilities. MAXON CINEBENCH is based on MAXON's award-winning animation software, CINEMA 4D, which is used extensively by studios and production houses worldwide for 3D content creation. MAXON software has been used in blockbuster movies such as Spider-Man, Star Wars, The Chronicles of Narnia and many more.
MAXON CINEBENCH runs several tests on your computer to measure the performance of the main processor and the graphics card under real world circumstances. The benchmark application makes use of up to 16 CPUs or CPU cores and is available for Windows (32-bit and 64-Bit) and Macintosh (PPC and Intel-based).
The resulting values among different operating systems are 100% comparable and therefore very useful with regard to purchasing decision-making. It can also be used as a marketing tool for hardware vendors or simply to compare hardware among colleagues or friends.
Details and download: http://www.maxon.net/pages/download/cinebench_e.html
Attachments
UPDATE: *Fix +Addition -Removal /Modification
+ IntelBurnTest:
IntelBurnTest
Simple command line based program to simplify the use of Intel's Linpack application.
Download
<hr>
I found this application great, personally! Linpack is reported to be better than Prime95's tests.
+ IntelBurnTest:
IntelBurnTest
Simple command line based program to simplify the use of Intel's Linpack application.
Download
<hr>
I found this application great, personally! Linpack is reported to be better than Prime95's tests.
- Joined
- Nov 20, 2003
- Messages
- 81,183
CPUCalc 1.9.2
CPUCalc is an overclocking-calculator able to overclocking with many Intel and AMD processors.
You just need to set your wished clock and it calculates all other settings, for example. It automatically sets the correct CPU-RAM-ratio and Referenceclock:HTT-Ratio.
It?s also able to calculate the new TDP with the overclocked settings.
Download:
http://downloads.guru3d.com/CPUCalc-1.9.2-download-2017.html
GPU-Z 0.2.7
GPU-Z 0.2.7 is out and it supports catalyst 8.7 beta & latest forceware drivers.
Here is the list of changes :
* Added display for GPU release date.
* Added display for transistor count
* Added mouseover readings for sensors graph
* Correctly named the three on-die sensors of RV770 and RV730
* Added support for voltage regulator monitoring on HD 4870 and HD 4870 X2
* RV770 GPU on HD 4870 X2 now called R700
* Added support for reading HD 4870 X2 3D clocks
* Added display of CrossFire Sideport status on HD 4870 X2
* Added more RV730 device IDs
* Added support for GeForce 9800 GT, 9800M GT, 9600M GT, 9700M GS/GT, 9500M G
* Added detection for RS780D
* Fixed incorrectly read ATI OD5 clocks
* Fix for memory clock reading on RV730
* Fixed ROM reading on RV730
* Fixed crash when no supported card detected
* Sensor graph width adjusted when scrollbars visible
Download:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
PhysX FluidMark v1.0.0
PhysX FluidMark requires NVDIA PhysX drivers 8.08.01 or higher and the CUDA DLL (this DLL has to be copied in the benchmark folder if your Forceware drivers are < 177.79 or if you don't have a GeForce (Radeon, etc.)).
PhysX FluidMark is a physics benchmark based on NVIDIA PhysX engine. This benchmark performs a fluid simulation by imitating the renderering of lava. Real physics parameters such as viscosity are used. SPH (Smoothed Particle Hydrodynamics) algorithm is enabled to increase the realism of the simulation.
PhysX FluidMark can run in pure software mode (all calculations are done on the CPU), or in hardware mode. Hardware mode includes 2 kinds of hardware:
* Ageia PhysX PPU
* GeForce PhysX - GeForce 8/9/GTX200 graphics cards only
This benchmark exploits OpenGL for graphic acceleration and requires an OpenGL 2.0 compliant graphics card: NVIDIA GeForce 5/6/7/8/9/GTX200 (and higher), AMD/ATI Radeon 9600+, 1k/2k/3k/4k (and higher) or a S3 Graphics Chrome 400 series with the latest graphics drivers.
Download:
http://www.ozone3d.net/benchmarks/physx-fluidmark/
Score database:
http://www.ozone3d.net/benchmarks/physx_fluidmark_scores.php
CPUCalc is an overclocking-calculator able to overclocking with many Intel and AMD processors.
You just need to set your wished clock and it calculates all other settings, for example. It automatically sets the correct CPU-RAM-ratio and Referenceclock:HTT-Ratio.
It?s also able to calculate the new TDP with the overclocked settings.
Download:
http://downloads.guru3d.com/CPUCalc-1.9.2-download-2017.html
GPU-Z 0.2.7
GPU-Z 0.2.7 is out and it supports catalyst 8.7 beta & latest forceware drivers.
Here is the list of changes :
* Added display for GPU release date.
* Added display for transistor count
* Added mouseover readings for sensors graph
* Correctly named the three on-die sensors of RV770 and RV730
* Added support for voltage regulator monitoring on HD 4870 and HD 4870 X2
* RV770 GPU on HD 4870 X2 now called R700
* Added support for reading HD 4870 X2 3D clocks
* Added display of CrossFire Sideport status on HD 4870 X2
* Added more RV730 device IDs
* Added support for GeForce 9800 GT, 9800M GT, 9600M GT, 9700M GS/GT, 9500M G
* Added detection for RS780D
* Fixed incorrectly read ATI OD5 clocks
* Fix for memory clock reading on RV730
* Fixed ROM reading on RV730
* Fixed crash when no supported card detected
* Sensor graph width adjusted when scrollbars visible
Download:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
PhysX FluidMark v1.0.0
PhysX FluidMark requires NVDIA PhysX drivers 8.08.01 or higher and the CUDA DLL (this DLL has to be copied in the benchmark folder if your Forceware drivers are < 177.79 or if you don't have a GeForce (Radeon, etc.)).
PhysX FluidMark is a physics benchmark based on NVIDIA PhysX engine. This benchmark performs a fluid simulation by imitating the renderering of lava. Real physics parameters such as viscosity are used. SPH (Smoothed Particle Hydrodynamics) algorithm is enabled to increase the realism of the simulation.
PhysX FluidMark can run in pure software mode (all calculations are done on the CPU), or in hardware mode. Hardware mode includes 2 kinds of hardware:
* Ageia PhysX PPU
* GeForce PhysX - GeForce 8/9/GTX200 graphics cards only
This benchmark exploits OpenGL for graphic acceleration and requires an OpenGL 2.0 compliant graphics card: NVIDIA GeForce 5/6/7/8/9/GTX200 (and higher), AMD/ATI Radeon 9600+, 1k/2k/3k/4k (and higher) or a S3 Graphics Chrome 400 series with the latest graphics drivers.
Download:
http://www.ozone3d.net/benchmarks/physx-fluidmark/
Score database:
http://www.ozone3d.net/benchmarks/physx_fluidmark_scores.php
just incase someone not posted this already
MotherBoard Monitor 5 with Intel Core CPU support including C2D/C2Q
http://www.thetechrepository.com/showthread.php?p=138
yeah the old school classic and father of all good hw monitoring programs
is still alive and kicking
MotherBoard Monitor 5 with Intel Core CPU support including C2D/C2Q
http://www.thetechrepository.com/showthread.php?p=138
yeah the old school classic and father of all good hw monitoring programs
is still alive and kicking
- Joined
- Feb 19, 2010
- Messages
- 6
That Calc util is old, and not updated..
their website forum doesn't work..
just a heads up..
===================
their website forum doesn't work..
just a heads up..
===================
Svet said:CPUCalc 1.9.2
CPUCalc is an overclocking-calculator able to overclocking with many Intel and AMD processors.
You just need to set your wished clock and it calculates all other settings, for example. It automatically sets the correct CPU-RAM-ratio and Referenceclock:HTT-Ratio.
It?s also able to calculate the new TDP with the overclocked settings.
Download:
http://downloads.guru3d.com/CPUCalc-1.9.2-download-2017.html
GPU-Z 0.2.7
GPU-Z 0.2.7 is out and it supports catalyst 8.7 beta & latest forceware drivers.
Here is the list of changes :
* Added display for GPU release date.
* Added display for transistor count
* Added mouseover readings for sensors graph
* Correctly named the three on-die sensors of RV770 and RV730
* Added support for voltage regulator monitoring on HD 4870 and HD 4870 X2
* RV770 GPU on HD 4870 X2 now called R700
* Added support for reading HD 4870 X2 3D clocks
* Added display of CrossFire Sideport status on HD 4870 X2
* Added more RV730 device IDs
* Added support for GeForce 9800 GT, 9800M GT, 9600M GT, 9700M GS/GT, 9500M G
* Added detection for RS780D
* Fixed incorrectly read ATI OD5 clocks
* Fix for memory clock reading on RV730
* Fixed ROM reading on RV730
* Fixed crash when no supported card detected
* Sensor graph width adjusted when scrollbars visible
Download:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
PhysX FluidMark v1.0.0
PhysX FluidMark requires NVDIA PhysX drivers 8.08.01 or higher and the CUDA DLL (this DLL has to be copied in the benchmark folder if your Forceware drivers are < 177.79 or if you don't have a GeForce (Radeon, etc.)).
PhysX FluidMark is a physics benchmark based on NVIDIA PhysX engine. This benchmark performs a fluid simulation by imitating the renderering of lava. Real physics parameters such as viscosity are used. SPH (Smoothed Particle Hydrodynamics) algorithm is enabled to increase the realism of the simulation.
PhysX FluidMark can run in pure software mode (all calculations are done on the CPU), or in hardware mode. Hardware mode includes 2 kinds of hardware:
* Ageia PhysX PPU
* GeForce PhysX - GeForce 8/9/GTX200 graphics cards only
This benchmark exploits OpenGL for graphic acceleration and requires an OpenGL 2.0 compliant graphics card: NVIDIA GeForce 5/6/7/8/9/GTX200 (and higher), AMD/ATI Radeon 9600+, 1k/2k/3k/4k (and higher) or a S3 Graphics Chrome 400 series with the latest graphics drivers.
Download:
http://www.ozone3d.net/benchmarks/physx-fluidmark/
Score database:
http://www.ozone3d.net/benchmarks/physx_fluidmark_scores.php
- Joined
- Aug 25, 2009
- Messages
- 8
I'm surprised LinX isn't on here, though maybe it's been suggested...? I didn't read all the posts...
- Joined
- Jul 12, 2013
- Messages
- 158
Ok, here are links to my Dropbox. They will be removed later to prevent it from being closed.
https://www.dropbox.com/sh/gpalg0tpyyfcivy/AAA_vvHgq7MUkdcXPH3Nh5rWa/CLICKBIOSII.7z?dl=0
https://www.dropbox.com/sh/gpalg0tpyyfcivy/AACw8NaNIQvgSLXdd-qvznioa/ControlCenterII.7z?dl=0
https://www.dropbox.com/sh/gpalg0tpyyfcivy/AAA_vvHgq7MUkdcXPH3Nh5rWa/CLICKBIOSII.7z?dl=0
https://www.dropbox.com/sh/gpalg0tpyyfcivy/AACw8NaNIQvgSLXdd-qvznioa/ControlCenterII.7z?dl=0