Overclock Database 2.0

[Aaron]

*** I no longer monitor and edit this database, the moderator >>flobelix<< does ***

Hello, welcome to the overclock database.

The database contains user name, followed by CPU, core, model # and speed. Post your overclock suicide/stable, whatever your preference.

You're welcome to show off your overclock here.

If you want on the % list use Everest to tell you what your % OC is and post a screenshot. I am not going to calculate % OC for you.



          All candidates for listing must be with MSI motherboard.

                                     
                              CPU Database
        You must post a cpu-z validation link to get yours listed.
These are all with air or liquid/water cooling with exceptions noted in 5K+ list.

<hr>

                                            5000+

<hr>

                                                                                                                                       
1 - thebanik w/Ph ll X4 965 @______________________6579 MHz
    LN[size=6pt]2​

/790FX-GD70       
2 - Evocarlos w/ i5 660 X2 @______________________ 6088 MHz
    Phase change refrigeration/P55-GD85     
3 - Froggy Gremlin w/ i7 2700K @___________________5737 MHZ
    Air/Z68A-GD80 (B3)
4 - Froggy Gremlin w/ i7 2700K @___________________5733 MHZ
    Air/Z68A-GD80 (G3)
5 - xbeatX w/ i7-2700K @_________________________5731 MHz
    Chilled water/P67A-GD65 (B3)
6 - Froggy Gremlin w/ i7 2600K @___________________5559 MHz
    Air/Z68A-GD80 (G3)
7 - Froggy Gremlin w/ i7 2700K @___________________5543 MHz
    Air/P67A-GD65
8 - Froggy Gremlin w/ i7 2700K @___________________5539 MHz
    Air/P67A-GD65 (B3)
9 - Froggy Gremlin w/ i7 2700K @___________________5536 MHz
    Air/Z68A-GD80 (G3)
10 - Froggy Gremlin w/ i7 2600K @__________________5532 MHz
    Air/Z68A-GD80 (B3)


<hr>

                                        Top 10 (%)

<hr>

1 - Lt_JWS w/ Core 2 E4300 Allendale @ __________100% (tied)
2 - Bio-Hazard w/ Core 2 Duo Allendale E4300 @ ____100% (tied)
3 - Quadrifoglio Verde w/ E4300 @ _______________95%
4 - AaronYuri w/ Core 2 Duo Conroe E6600 @ ______86% 
5 - aicjofs w/ Opteron Toledo 165 @ ______________78% 
6 - Froggy Gremlin w/ i7 920 @ __________________71%
7 - Jack t.N. w/ C2D e6600 @ ___________________68%
8 - flobelix w/ Opteron 165 Denmark @ ____________64% 
9 - DryHeat w/ Core 2 Duo Allendale E6300 @ _______60% 
10 - Exo w/ Opteron Toledo 165 @ ________________56% 
​

<hr>

                                              Intel

<hr>

1 - Froggy Gremlin w/ i7 2700K @_________________________5737 MHZ
    Air/Z68A-GD80 (B3)
2 - Froggy Gremlin w/ i7 2700K @_________________________5733 MHZ
    Air/Z68A-GD80 (G3)
3 - Froggy Gremlin w/ i7 2600K @_________________________5559 MHz
    Air/Z68A-GD80 (G3)
4 - Froggy Gremlin w/ i7 2700K @_________________________5543 MHz
    Air/P67A-GD65
5 - Froggy Gremlin w/ i7 2700K @_________________________5536 MHz
    Air/Z68A-GD80 (G3)
6 - Froggy Gremlin w/ i7 2600K @_________________________5532 MHz
    Air/Z68A-GD80 (B3)
7 - Sea Dog w/ i7 2700K @______________________________5510 MHz
    P67A-GD65 (B3)
8 - Froggy Gremlin w/ i7 990X @__________________________5424 MHz
    Big Bang-XPower
9 - Froggy Gremlin w/ i7 2700K@_________________________5414 MHz
    Air/P67A-GD65 (B3)
10 - Froggy Gremlin w/ i7 2600K@________________________5407 MHz
    Air/P67A-GD65 (B3)


<hr>

                                              AMD

<hr>

1 - damric w/FX-4100 __________________________5229MHz
    890FXA-GD65
2 - mrinfinit3 w/Ph II X4 965 @___________________4715 MHz
    chilled methanol~870-G45
3 - damric w/Athlon X4 860K @___________________4498 MHz
    air~A88X-G45 GAMING
4 - mrinfinit3 w/Ph II X6 1095T @_________________4400 MHz
    NF980-G65/H2O
5 - Thor3666 w/Ph II X4 965 @___________________4200.36 MHz
    K9A2 Platinum
6 - gldndragn w/Ph II X4 965 @___________________4200.21 MHz
    870A Fuzion
7 - PingviN w/Ph II X4 965 @_____________________4060 MHz
    790FX-GD70
8 - Bodhi w/Ph II X2 550 Blk Ed @ ________________4040 MHz
    790FX-GD70
9 - JokersMommy w/Ph II X2 550 Blk Ed @ _________4018 MHz
    790FX-GD70
10- Greyno3 w/Ph II X4 965 @____________________4000 MHz
    790FX-GD70




 

<hr>

Be careful! When you're not careful with your OC you might end up with smoke instead of a higher ranking

​

​

​

 

[aicjofs]

I'll play but it's not going to be as much fun for the AMD folk if you do a Top 20.  You can buy Intel CPU's at stock that are faster then most current AMD CPU's can do without dry ice or phase change.  Might want to do 2 lists of AMD and Intel Top 10 instead or maybe a percentage overclock of you CPU over stock.  I imagine we can use a validated CPU-Z instead of a screenshot, same thing.  I only have one MSI entry though(they took too long to realease the P6N or I would have 2 MSI entries)

My MSI MS-7100 powered entry and Opteron 165 now retired. 3202Mhz

http://valid.x86-secret.com/show_oc?id=110078

My backup rig.  Asus mainboard with 3.2 P4.  3851Mhz

http://valid.x86-secret.com/show_oc?id=138654

The new main rig. Intel mainboard with QX6700, didn't put too much effort into finding the absolute CPUz max.  3859Mhz

http://home.comcast.net/~msibios/qx.jpg

 

[Quadrifoglio Verde]

In addition to that, any respectable P4 will easily reach higher clock speeds than any current Core 2 Duo. A list containing all AMD and Intel processors would be nothing more than a bunch of numbers in the air...

 

[Aaron]

But that's the purpose of it. A bunch of numbers. I shall be specifying CPU type and core. Maybe I'll split down to CPU model if results become deep enough.

I'll change to a seperate top 10 section for AMD then a section for Intel.

I'll do a percentage one too then.

aicjofs, not really about the board/CPU combination etc, it's all about the CPU clock speed.

 

[aicjofs]

aicjofs, not really about the board/CPU combination etc, it's all about the CPU clock speed.

I know but since it's an MSI forum I was stating what is MSI and what's not.

 

[Aaron]

I know but since it's an MSI forum I was stating what is MSI and what's not.

Fair enough.

What percentage overclock you got, aicjofs?

BTW nice RAM overclock you got there

 

[aicjofs]

Let's see QX6700 is 45%
Opteron 165 was 78%   
P4 a meager 20% but hey it's stock cooling.

I guess you mean the DDR2 (because the ZX DDR1's were awesome too)?  Yeah they are sweet, these Crucials are 500Mhz 5-5-5 stock, and they run stable at 530 (1060DDR) 4-4-4 at stock volts(2.2V).

Why is you RAM single channel?(I mean I know your sig says 1 stick but why not 2?)

 

[BG84]

almost stable : http://valid.x86-secret.com/show_oc?id=192622
i prefer posting near to stable or stable clock than like suggested already clocks that are suicide shots and dont mean nothing.

 

[Aaron]

I know I would call it sorta stable as you can boot into Windows and run CPU-Z. Why I didn't include my suicide shot of 3.7GHz LOL.

Just POSTing is about 5% stable IMO. Not enough to be listed.

Getting into Windows and running CPU-Z is about 50% stable.

Sweet overclock there BG84. 1.2GHz overclock removed.

Percentage by any chance?

aicjofs,

When I purchased the 1GB stick in November, it cost me ?130. I didn't have the budget to afford the ?260 DC kit.

BTW, your the top of every list so far :lol_anim:

 

[Exo]

My opteron 165:

http://valid.x86-secret.com/show_oc?id=192630  56% oc
the chip seems to have a 'fsb wall' @ 313 Mhz - Can't go above that no matter what i do, tried 3 boards, lower MP, nothing except massive Vcore helps. 
Thanks to aicjofs btw for the bios mod wich allows me to select 150Mhz ram divider as the 166Mhz divider doesn't work on this chip.

I'll try to make a 4.3 Ghz suicide shot with my E6700 if i have time - I'm gonne use a spare windows install for that , not currupting my main install 

 

[Aaron]

Considering Exo insists on trampling my 3.7GHz... I'll add a Suicide Shot chart too

 

[BG84]

.

 

[Exo]

My MSI MS-7100 powered entry and Opteron 165 now retired. 3202Mhz

http://valid.x86-secret.com/show_oc?id=110078

What Vcore was that ? Was it stable ?

 

[Aaron]

No need to be so harsh there. It's all fun and games.

If you wish so...

Note to everyone: DON'T post if you don't want to be added. It makes me not waste my time, thank you.

 

[SillySider03]

I don't want to enter, but...Don't make me whip out my e-peen! I have a 3000+ Venice benchable at 3150Mhz, an Opteron 146 benchable at 3400Mhz, a Sempron at 28somethingMhz and a 1600Mhz Duron that benched at 2550Mhz...My bro had the WR for 165's at just over 3500Mhz.

C'mon guys, let's see some clocks!!!

 

[Aaron]

SillySlider03,

It isn't a competition, there is no prize. It's just so people can compare their overclock to others. That was my intention of starting this topic anyway...

 

[SillySider03]

SillySlider03,

It isn't a competition, there is no prize. It's just so people can compare their overclock to others. That was my intention of starting this topic anyway...

I understand it isn't a competition and is just for fun.

 

[Lt_JWS]

Your wish is my command  You know you cant hide from me.....  :lol_anim:

2.8Ghz 1.35vcore in bios with my purdy new 3600+ Brisbane



My old E4300 @ 3.6Ghz



and my POS celeron 331 @ 4.3Ghz

http://valid.x86-secret.com/show_oc?id=140164

 

[aicjofs]

What Vcore was that ? Was it stable ?

I think the 3.2Ghz was 1.65V maybe, whatever it was it was alot.  Only a screenshot.  It could bench at 3.15Ghz, and was stable at 3.1Ghz at 1.6V.  But it ran 3.0 at a lower 1.525V so I ran that most of the time.  Like this QX6700, it's prime stable at 3806 at 1.57V but is also stable at 3.66 at 1.5V, when you have a 24/7 rig it seems senseless to give huge amounts of voltage for tiny mhz gains.


@BG84 and Aaron:  I think you 2 are just having a misunderstanding we are just having fun here. 

@SillySider03:

My bro had the WR for 165's at just over 3500Mhz.

I thought the WR was just under 3500. 

@Lt_JWS:  Those are some pretty numbers all the way around.

 

[Russ_xp]

My highest OC which booted and validated (but fails Orthos) on the Opteron "Denmark" 185 is 3000Mhz (15%).
http://valid.x86-secret.com/show_oc.php?id=183433

Will have to play with the multi and voltages when I get the time (PS - for Folding SMP I run at 2880).