Overclock Database 2.0

[Bio-Hazard]

OK, can I play along too...........

Here's my little E4300, not to bad I guess..........

3712.45 MHz (412.49 * 9)

http://valid.x86-secret.com/show_oc.php?id=187008

 

[Stick]

bio-hazard, was it stable? how's the temps under load with water cooling?

 

[Bio-Hazard]

Nope, not stable, but stable enough to run some SuperPi and a few other benchmarks.

I have no idea what full load temps get up to .............it won't stay running long enough under full load to fully heat the thing up. But in Bios is reporting around 30c on a average morning idle.

 

[Aaron]

And an update: I just had my E6600 @ 398xMHz, however I'm having posting trouble with the board @ 425+FSB. I managed to run SuperPI in 12 seconds though. I'll post a validation when I can get the board to boot @ 440FSB again. This board seems to decide when it wants to complete POST. It always freezes just before verifying DMI pool data.

I'll make all the changes now, I haven't been looking in on the thread.

OK, all changes have been made.

After two hours of tweaking:

Check this out!! http://valid.x86-secret.com/show_oc?id=208433

 

[aicjofs]

Now thats how to get it done Aaron.  Good job, that's what a skilled clocker should be getting for a E6600 that board and the cooling.  Very nice...

 

[Aaron]

Cheers for the complimant aicjofs.

I shall keep pushing the barrier, I'm gonna drop a 3400rpm fan on the Scythe and see if I can go any higher.

 

[Stick]

After two hours of tweaking:

Check this out!! http://valid.x86-secret.com/show_oc?id=208433

that's excellent. congratulations on 4GHz 

 

[Aaron]

that's excellent. congratulations on 4GHz 

Thanks Stick. As soon as I can break this 455FSB barrier, I assure you, more shall be coming.

 

[Exo]

Cheers for the complimant aicjofs.

I shall keep pushing the barrier, I'm gonna drop a 3400rpm fan on the Scythe and see if I can go any higher.

Yes, that's the way... None of these silent fans that don't move any air.
Let it make noise, it needs to cool !!  :lol_anim:

 

[Aaron]

Yes, that's the way... None of these silent fans that don't move any air.
Let it make noise, it needs to cool !!  :lol_anim:

A very lot!! It took 1.6v just to get it into Windows @ 4GHz.

Well @ 3.6GHz I'm on 56c on both cores load. Orthos for 2 hours. Passes any benches, can't run TAT, don't work on 64-bit, damn thing!

When I get around this 455FSB barrier I'll hopefully get 4.2GHz just to be top of the list.

 

[Bio-Hazard]

I'll make all the changes now, I haven't been looking in on the thread.

OK, all changes have been made.

You missed the Top 10 (%) listing.............. My little E4300 is over a 100% OC...............

 

[Aaron]

Bio-Hazard,

I couldn't add it, you never said how much it was. I'll add it now.

 

[Bio-Hazard]

Opps, sorry, my bad........thanks.........

 

[bishbosh]

Bio-Hazard,

I couldn't add it, you never said how much it was. I'll add it now.

In that case, could you add me to the Top 10 (%) listing as well?
This post https://forum-en.msi.com/index.php?topic=107990.msg801536#msg801536 shows more.

Cheers
bishbosh

 

[frans2h]

Hi All...just got my 975x PUE at 3367 Mhz ( 420 x 8 ) and stable after 24 hour prime95....but still looking to used lower vcore..i'm at 1.4v ( Bios Setting ) and idle 53c, load 56c...

http://valid.x86-secret.com/show_oc.php?id=212051

 

[Aaron]

Added.

 

[BG84]

thanx Aaron for adding me
sorry Lt_JWS  :lol_anim:

 

[flobelix]

Aaron,
would you mind adding me to place 4 in AMD section just after BK who is 9 mhz ahead of me (see sig: opteron 165 @ 2871mhz, 60% oc) ?

 

[Aaron]

Aaron,
would you mind adding me to place 4 in AMD section just after BK who is 9 mhz ahead of me (see sig: opteron 165 @ 2871mhz, 60% oc) ?

Done.

 

[flobelix]

Thanks a lot!