P45 Diamond 7516v168 Beta
- Thread starter chaugh
- Start date
- Joined
- Dec 1, 2008
- Messages
- 83
Hey can you post it to John the Newbie, and ask him to load it with logs for us?
thanx
thanx
- Joined
- Dec 1, 2008
- Messages
- 83
:lol_anim: ...yes him 
- Joined
- Nov 20, 2006
- Messages
- 14,939
Here are the last changelogs (since v1.50):
v1.6b7 -> v1.6b8:
- Fix system can not detect PCI-E x1 frame grabber card
v1.6b6 -> v1.6b7
- Add "Virtualization Technology" option
v1.6b5 -> v1.6b6
- Add patch to improve DDR3 memory compatibility.
- Fix CPU Voltage can not setting above 1.45v.
- Update MRC to Ver-2.55
v1.6b4 -> v1.6b5
- Fix CrossFire Function fail when use MS-V162 (R4650-D1G) x 2 pcs
v1.6b3 -> v1.6b4
- Fix Memtest fail with Elixir M2F2G64CB8HA4N-DG 2G*2 DDR3-1600
v1.6b2 -> v1.6b3
- Fix the system hang up after enable Extreme Memory Profile when using Patriot PVS34G 1600LLK (DDR3-1600-2G-1.9V).
v1.6b1 -> v1.6b2
- Add solution for 1000G HDD will show 100G in post2.
- Add TopSwap module.
- Add patch to avoid AHCI detect incrrect issue
v1.50 -> v1.6b1
- Patch the system hang when running CrossFire with R4870-T2D512 OC in Vista.
- Patch the system can't resume from S3 or S4 when using ATI 4780??2 VGA card.
- Fixed the issue: when an ATI 3870x2 VGA Card be pluged on the PCIE Slot1, and another VGA Card exist, the ATI 3870x2 VGA Card could not lighten the Screen.
- Set Token:ACPI_SLIC_TBL= off to aviod vista can't login.
v1.6b7 -> v1.6b8:
- Fix system can not detect PCI-E x1 frame grabber card
v1.6b6 -> v1.6b7
- Add "Virtualization Technology" option
v1.6b5 -> v1.6b6
- Add patch to improve DDR3 memory compatibility.
- Fix CPU Voltage can not setting above 1.45v.
- Update MRC to Ver-2.55
v1.6b4 -> v1.6b5
- Fix CrossFire Function fail when use MS-V162 (R4650-D1G) x 2 pcs
v1.6b3 -> v1.6b4
- Fix Memtest fail with Elixir M2F2G64CB8HA4N-DG 2G*2 DDR3-1600
v1.6b2 -> v1.6b3
- Fix the system hang up after enable Extreme Memory Profile when using Patriot PVS34G 1600LLK (DDR3-1600-2G-1.9V).
v1.6b1 -> v1.6b2
- Add solution for 1000G HDD will show 100G in post2.
- Add TopSwap module.
- Add patch to avoid AHCI detect incrrect issue
v1.50 -> v1.6b1
- Patch the system hang when running CrossFire with R4870-T2D512 OC in Vista.
- Patch the system can't resume from S3 or S4 when using ATI 4780??2 VGA card.
- Fixed the issue: when an ATI 3870x2 VGA Card be pluged on the PCIE Slot1, and another VGA Card exist, the ATI 3870x2 VGA Card could not lighten the Screen.
- Set Token:ACPI_SLIC_TBL= off to aviod vista can't login.
- Joined
- Dec 1, 2008
- Messages
- 83
Hey Jack.
Can you perhaps post that bios for download please?
Can you perhaps post that bios for download please?
- Joined
- Dec 1, 2008
- Messages
- 83
Is there any bios later than this version yet? If no, could someone please post this bios for download?
- Joined
- Nov 20, 2006
- Messages
- 14,939
Nope.
Contact MSI Technical Support to obtain a "copy": http://support.msi.com/
- Joined
- Mar 24, 2010
- Messages
- 19
been using 1.67 since I got my board a week ago and so far nothing an RMA can't fix. lol
J/K, but I'm not sure whether it's my settings, or my VGA (9800gtx) or perhaps the fact I used PCI-E slot 4, but for some reason, it's showing up as 8x and not 16x and I only use one card. I thought it auto selected 16x when a single card was in use?
I am also using Crucial Ballistix memory that isn't on their 'guaranteed to work' chart, and at first I was tempted to send it back, but after realizing that in order for these 1333 stix to work properly, I had to manually set the timings and so far so good. Only wish I could get my system to boot up at 400 though as it just pops on and right back off.
J/K, but I'm not sure whether it's my settings, or my VGA (9800gtx) or perhaps the fact I used PCI-E slot 4, but for some reason, it's showing up as 8x and not 16x and I only use one card. I thought it auto selected 16x when a single card was in use?
I am also using Crucial Ballistix memory that isn't on their 'guaranteed to work' chart, and at first I was tempted to send it back, but after realizing that in order for these 1333 stix to work properly, I had to manually set the timings and so far so good. Only wish I could get my system to boot up at 400 though as it just pops on and right back off.