P67A-GD65 (B3) Dead OC Genie

[SEYARU]

Hi i have a big problem with my board after taking the OC Genie enable i disable it by the Control Center version 2.2005 which asked me to reboot to apply the changes I did and after that gave no video output. I test with other processor, rams and vga but i have the same result, i reset bios and cmos and clean all slots but dont see video output. 

 

[Svet]

>>Clear CMOS Guide<<

 

[SEYARU]

I've done this process many times but dont see any results

 

[Svet]

have you removed power cord from the PSU 1st?

 

[SEYARU]

yes i remove all my hardware wait 30 minutes and then reassembled everything including another processor and RAM but did not see changes

 

[Svet]

seems something is broken then
try again with mainboard out of pc case

 

[SEYARU]

I have died since the case out of just trying different things right now reassembled all but still the same

 

[dragondisco]

Try a different display/monitor.

 

[SEYARU]

i test other board in the same monitor with the same hw and see all but in my GD65 fail...

 

[MarkedOne]

I have a problem similar today after reboot my 890 board , hard reset not working, I even change the PSU,  at one time I clear the bios using the jumper and I forgot to close the switch on the PSU, guess what it reboot after.