Patriot RAM kits - potential incompatibility with Intel 800-series (Z890, B860 etc.)

citay

citay

Pro
SERGEANT
Joined
Oct 12, 2016
Messages
28,591
A few people have reported on this forum that their Intel 800-series-based board wouldn't boot with their Patriot RAM kit. Since that seemed odd to me, I did some further research, and soon found other reports of the same issue, even with different motherboard brands like ASUS and Gigabyte. There seem to be some Patriot DDR5 kits, particularly 32 GB kits of 2x 16 GB, that simply do not want to work whatsoever with an 800-series platform like a Z890 board for example.

People have even gone so far as to replace their board and their CPU, but as long as they kept the same Patriot RAM kit, it just wouldn't boot. Once they have used a RAM kit from a different brand, it booted right up.

Since the other thread where we are discussing this has a rather vague title, I thought I'd make a new thread, where people can reply if they encountered the same problem.

Here are some cases of these I could find after some short research:
MSI PRO B860-P WIFI, BIOS does not load (MSI Forum)
MAG Z890 TOMAHAWK WIFI (MSI Forum, two cases)
ASUS Rog Strix Z-890-A no POST after VRAM QLED (ASUS forum, two cases)
New Build Help - Won't Post Z890 Eagle Wifi7 (r/gigabyte, several cases)
Z890 EAGLE WiFi 7: not posting - RAM compatibility? (r/gigabyte, several cases)
Z890-P PRO New build DRAM light Problem (reddit)
Also several similar threads on German forums.

This message from a reddit thread was the closest to come to an explanation:

Screenshot 2025-12-24 at 13-30-15 New Build Help - Won't Post Z890 Eagle Wifi7 r_gigabyte.png


Later, this thread made it likely that the problems are caused by DDR5 modules using 1Gx8 density ICs (memory chips), which are not supported by this platform. Apparently, Patriot had or has several RAM kits using these kinds of memory ICs, therefore they won't work on 800-series / Core Ultra.

It would seem that there is no solution other than to replace the kit with a completely different one, unless Patriot support can provide a better solution.

Everyone that was/is affected by this (maybe apart from the cases already listed), please reply here. I hope this can then be easily found by other users and they don't have to spend time and money doing unnecessary troubleshooting. As mentioned, I've seen at least one user replace their board and their CPU over this (which is never a good idea, blindly replacing parts, one or all of them might end up being a complete waste of time and resources). But if we look at the reports, the only thing that makes the system work is to replace the RAM kit with one from a different brand.
 
Last edited:
Sort by date Sort by votes
Adding another documented case to this thread to confirm that this incompatibility is real, deceptive, and results in a classic "Ghost POST" failure state.


Test Setup & Hardware​


  • CPUs: Intel Core Ultra 7 (Arrow Lake) / Previously tested with 13th/14th Gen LGA1700
  • Motherboards: ASUS ROG Strix Z890-I Gaming WiFi (Mini-ITX) / Previously ASUS ROG Strix B760-F Gaming WiFi
  • Memory: Patriot Viper Venom 16GB DDR5 6000MHz CL30 (Single module: PVV516G60C30)
  • Display Output: Onboard HDMI (LSPCON DP-to-HDMI bridge) / iGPU (Intel Xe)

The Symptom: "Ghost POST"​


What makes this issue exceptionally misleading is that onboard diagnostic indicators report zero memory faults:


  1. Power is applied on the test bench.
  2. The Q-LED sequence cycles normally: CPU (Red) -> DRAM (Yellow) -> VGA (White) -> LEDs Turn Off.
  3. All diagnostic LEDs turning off indicates that the motherboard has successfully passed POST and transitioned to the S0 operational state.
  4. Result: Total black screen. Zero video signal and zero EDID handshake over HDMI. The monitor remains in power-saving standby despite the board signaling a successful boot.

The 3-Month Rabbit Hole​


  • Board 1 (B760-F): Encountered the exact same no-signal behavior a month ago using this exact Patriot module; assumed a DOA motherboard and returned it.
  • Board 2 (Z890-I + Core Ultra 7): On an entirely different generation and platform, the symptom replicated identically. The failure was initially attributed to an open-box defect or a dead LSPCON active converter chip. Testing with older legacy Quadro cards (lacking pure UEFI GOP support) further masked the actual root cause.
  • Misidentifying the motherboard or CPU as defective resulted in endless bench testing, redundant RMA/return cycles, and three months of wasted time, budget, and effort.

Technical Assessment​


The RAM passes initial electrical training, clearing the DRAM check. However, the SPD Hub / PMIC handshake or timing tables on these Patriot kits appear to corrupt or silently stall the UEFI GOP (Graphics Output Protocol) driver when allocating the dynamic UMA Framebuffer for the Intel Xe iGPU. The motherboard registers a completed POST sequence, but no valid frame data is transmitted to the display controller.


Conclusion & Current Dilemma​


I stumbled upon this thread purely by chance while researching. Everything was already boxed up and the return process was initiated; however, reading these findings is creating a serious dilemma—tempting me to unbox everything, source a QVL-certified Corsair kit, and run one final open-bench test before shipping them back.


To anyone experiencing a system that cycles past DRAM and VGA debug LEDs but outputs no display on Intel 700/800 series platforms: do not RMA your motherboard or processor before testing with an alternative memory kit (e.g., Corsair Vengeance or Kingston Fury).
 
Upvote 0 Downvote
citay said:
A few people have reported on this forum that their Intel 800-series-based board wouldn't boot with their Patriot RAM kit. Since that seemed odd to me, I did some further research, and soon found other reports of the same issue, even with different motherboard brands like ASUS and Gigabyte. There seem to be some Patriot DDR5 kits, particularly 32 GB kits of 2x 16 GB, that simply do not want to work whatsoever with an 800-series platform like a Z890 board for example.

People have even gone so far as to replace their board and their CPU, but as long as they kept the same Patriot RAM kit, it just wouldn't boot. Once they have used a RAM kit from a different brand, it booted right up.

Since the other thread where we are discussing this has a rather vague title, I thought I'd make a new thread, where people can reply if they encountered the same problem.

Here are some cases of these I could find after some short research:
MSI PRO B860-P WIFI, BIOS does not load (MSI Forum)
MAG Z890 TOMAHAWK WIFI (MSI Forum, two cases)
ASUS Rog Strix Z-890-A no POST after VRAM QLED (ASUS forum, two cases)
New Build Help - Won't Post Z890 Eagle Wifi7 (r/gigabyte, several cases)
Z890 EAGLE WiFi 7: not posting - RAM compatibility? (r/gigabyte, several cases)
Z890-P PRO New build DRAM light Problem (reddit)
Also several similar threads on German forums.

This message from a reddit thread was the closest to come to an explanation:

Screenshot 2025-12-24 at 13-30-15 New Build Help - Won't Post Z890 Eagle Wifi7 r_gigabyte.png't Post Z890 Eagle Wifi7 r_gigabyte.png


Later, this thread made it likely that the problems are caused by DDR5 modules using 1Gx8 density ICs (memory chips), which are not supported by this platform. Apparently, Patriot had or has several RAM kits using these kinds of memory ICs, therefore they won't work on 800-series / Core Ultra.

It would seem that there is no solution other than to replace the kit with a completely different one, unless Patriot support can provide a better solution.

Everyone that was/is affected by this (maybe apart from the cases already listed), please reply here. I hope this can then be easily found by other users and they don't have to spend time and money doing unnecessary troubleshooting. As mentioned, I've seen at least one user replace their board and their CPU over this (which is never a good idea, blindly replacing parts, one or all of them might end up being a complete waste of time and resources). But if we look at the reports, the only thing that makes the system work is to replace the RAM kit with one from a different brand.
Click to expand...
I purchased an MSI MPG Z890 Edge Ti WiFi motherboard and Patriot PVV532G640C32K DDR5 RAM (listed as compatible as of July 9, 2026).
I updated the BIOS to version 7E19v2AB0 (dated August 5, 2026), but the board remains stuck on error code 55, even when using a single module and after performing a JBAT reset.
What is the cause?
 
Upvote 0 Downvote
It sounds exactly like what this thread is about: That Patriot kit is not really compatible with Core Ultra / 800-series Intel.

I don't know why MSI would list it as compatible, it's probably a mistake, because Patriot don't list it as such. Here from their QVL:

Patriot.png


I included a couple other kits at the top which are compatible, so they do differentiate about 800-series chipset platforms.

And this PVV532G640C32K kit is a known incompatible one, we had several cases of it here on the forum.

There is only one fix: Get a different kit of RAM, ideally from another brand. Yes, I know, Patriot kits are often among the cheapest ones, so they're attractive and it might be hard to find another kit for a similar price, but if you ask me, there is no chance you get this kit working in your system. It will work fine with a 12th-14th gen Intel on 600/700-series, or on AM5, but not with Core Ultra.
 
Upvote 0 Downvote
y.balicco said:
I purchased an MSI MPG Z890 Edge Ti WiFi motherboard and Patriot PVV532G640C32K DDR5 RAM (listed as compatible as of July 9, 2026).
I updated the BIOS to version 7E19v2AB0 (dated August 5, 2026), but the board remains stuck on error code 55, even when using a single module and after performing a JBAT reset.
What is the cause?
Click to expand...

Can provide CPU-Z export file?
You can obtain it:
From CPU-Z -> Tools -> Save Report as .TXT

citay said:
It sounds exactly like what this thread is about: That Patriot kit is not really compatible with Core Ultra / 800-series Intel.

I don't know why MSI would list it as compatible, it's probably a mistake, because Patriot don't list it as such. Here from their QVL:

View attachment 212825

I included a couple other kits at the top which are compatible, so they do differentiate about 800-series chipset platforms.

And this PVV532G640C32K kit is a known incompatible one, we had several cases of it here on the forum.

There is only one fix: Get a different kit of RAM, ideally from another brand. Yes, I know, Patriot kits are often among the cheapest ones, so they're attractive and it might be hard to find another kit for a similar price, but if you ask me, there is no chance you get this kit working in your system. It will work fine with a 12th-14th gen Intel on 600/700-series, or on AM5, but not with Core Ultra.
Click to expand...

Need to be checked if it's dual or single side.
It is possible that even with the same model name, the different die could be used to manufacture the kit.
image008.png


While on MSI QVL are listed Dual.
 
Upvote 0 Downvote
True. MSI could've tested with a kit of single-rank modules for their QVL, meaning, one using 16 Gbit (= 2GB) density ICs (memory chips), where there's one side of the module populated with eight memory chips of 2 GB each. Whereas Patriot's QVL lists the seemingly more common configuration of 8 Gb (= 1GB) density ICs, dual-rank, both sides populated with eight 1 GB chips each, which Core Ultra / 800-series doesn't seem to support.

It is not uncommon for RAM makers to keep the same model name for different configurations "under the hood", as long as they can all fulfil the same specifications. So that's how MSI can end up with a more uncommon configuration of this kit, while several users end up with the configuration that won't work on 800-series. That is certainly a potential explanation for this discrepancy in the QVL.
 
Upvote 0 Downvote
You must log in or register to reply.
Back
Top