lu158902e4
New member
- Joined
- Jun 15, 2026
- Messages
- 2
I am very new here, so I should probably apologize upfront if I do not yet get the finer details of this forum.
I recently re-discovered a set of parts that I going to turn into a NAS some years ago.
I build the NAS just now (setup in my signature), installed Openmediavault and it is working, but…
I wanted to add a DAS (4x 2TB SSD + 4x 1T 2.5" HDD), connect both with an HBA LSi 90207-8e in the NAS and a Dual Mini SAS Adapter in the DAS.
So I put the LSi 90207-8e in the outside PCIe_E3 slot. No go. Could not see the DAS drives in OMV nor could see them in the BIOS (BTW I don't seem to have a Board/System Explorer in my BIOS - latest update, maybe because this is an Intel 600 series?).
Can someone tell me how to check whether both PCIe slots (E1 and E3) are OK and it is just a bad LSi 90207-8e I got from eBay.
Any help would be much appreciated.
I recently re-discovered a set of parts that I going to turn into a NAS some years ago.
I build the NAS just now (setup in my signature), installed Openmediavault and it is working, but…
I wanted to add a DAS (4x 2TB SSD + 4x 1T 2.5" HDD), connect both with an HBA LSi 90207-8e in the NAS and a Dual Mini SAS Adapter in the DAS.
So I put the LSi 90207-8e in the outside PCIe_E3 slot. No go. Could not see the DAS drives in OMV nor could see them in the BIOS (BTW I don't seem to have a Board/System Explorer in my BIOS - latest update, maybe because this is an Intel 600 series?).
Can someone tell me how to check whether both PCIe slots (E1 and E3) are OK and it is just a bad LSi 90207-8e I got from eBay.
Any help would be much appreciated.