radix axe6600/graxe66 AI QOS broken/not working properly-horrible bufferbloat

P

pcguru2000

New member
PRIVATE E-2
Joined
Aug 13, 2008
Messages
12
Before I bought this router, I tested my bufferbloat on an old 8 year old netgear router, I was getting an "A" rating but the Ethernet speeds were horrible.

Purchased the radix axe6600 and re-ran the test and got a "B" rating. The speeds were better but latency when from 26ms to 47ms.

On the radix, I'm testing bufferbloat via a 2.5gb Ethernet port. I have tried every QOS mode (AI auto, gaming, streaming, and WFH) except for the traditional QOS. I'm on firmware 720348. Are there fixes for this?

There are reviews on other sites that say that they are getting the same result testing for bufferbloat, except if they use and configure the "traditional QOS", then they are able to get their bufferbloat to "A+"

Attached is the bufferbloat screencaps of the old router and the graxe66
 

Attachments

  • radix axe6600.jpg
    radix axe6600.jpg
    121.5 KB · Views: 106
  • old netgear.jpg
    old netgear.jpg
    114.6 KB · Views: 109
Sort by date Sort by votes
from the product's overview, AI QOS is not just about minimizing data transfer latency. It's also improving buffering time, data transfer stability, and packet loss. bufferbloat is just measuring latency, not sure if it can reflect the actual performance of the AI QOS...
 
Upvote 0 Downvote
all im trying to say is router is capable of a+ rating in the bufferbloat test according to other's test results. it's just the bufferbloat test is not optimized for the AI QOS mode.
 
Upvote 0 Downvote
teletubby_po said:
all im trying to say is router is capable of a+ rating in the bufferbloat test according to other's test results. it's just the bufferbloat test is not optimized for the AI QOS mode.
Click to expand...
I tested also the gaming mode and the streaming mode, no change in bufferbloat rating. The only test result for bufferbloat I found was someone on amazon saying they customized the traditional QoS mode, which is a manual configuration mode, to get a+ on bufferbloat.
 
Upvote 0 Downvote
Getting a+ now on bufferbloat. Fixed it by going into advanced, qos, Ai qos tab-disabled, traditional qos tab- disabled, bandwidth limiter disabled.
 
Upvote 0 Downvote
Back
Top