RTX 3080 Ventus 3X 10G OC Screw Sizes

[derrick.chea15e102e6]

I watercooled my gpu about 4 years ago when I got it and am looking to go back to air cooling while I switch over to a new build. Looks like I misplaced all the screws when I moved houses and need to buy new ones. I couldn't find any concrete information on what sizes the screws were, but I've been seeing either M2x7 or M2x8 for the back plate at least. Couldn't find any information for the screws on the inside/bracket thing. If anyone could help that would be great!

 

[rizekraw15fd02ed]

I watercooled my gpu about 4 years ago when I got it and am looking to go back to air cooling while I switch over to a new build. Looks like I misplaced all the screws when I moved houses and need to buy new ones. I couldn't find any concrete information on what sizes the screws were, but I've been seeing either M2x7 or M2x8 for the back plate at least. Couldn't find any information for the screws on the inside/bracket thing. If anyone could help that would be great!

I wanted to give the video card for repair, I have the same one, only 3080ti ventus x3, you can not thank me, if you need anything else, write, here are the measurements of all the bolts, nothing complicated, I think you will figure it out, if anything use ChatGPT. Good luck

https://imgur.com/a/rwFq5fk

Or:

2.rar

drive.google.com

 

[derrick.chea15e102e6]

I wanted to give the video card for repair, I have the same one, only 3080ti ventus x3, you can not thank me, if you need anything else, write, here are the measurements of all the bolts, nothing complicated, I think you will figure it out, if anything use ChatGPT. Good luck

https://imgur.com/a/rwFq5fk

Or:

2.rar

drive.google.com

I just finished putting my gpu back together with those measurements and it works perfectly. Thank you so much!

 

[c88maur15a802e6]

I just finished putting my gpu back together with those measurements and it works perfectly. Thank you so much!

Im actually doing the same thing and ran across the same issue with the misplacement of screws. Where did you acquire your screws from?

 

[derrick.chea15e102e6]

Im actually doing the same thing and ran across the same issue with the misplacement of screws. Where did you acquire your screws from?

I just bought a set of various screw sizes from Amazon. Lots of options to choose from but I found one that mostly covered the range of screw sizes I needed. A few weren’t exact but the next size up or down worked fine.

 

[c88maur15a802e6]

I just bought a set of various screw sizes from Amazon. Lots of options to choose from but I found one that mostly covered the range of screw sizes I needed. A few weren’t exact but the next size up or down worked fine.

Thanks for that. I actually got super lucky and after redigging for the waterblock box for the 5th time I actually found it with the screws in it so I super lucked out!