Setup x85 board but Monitor does not turn on,

[kanonikos]

Hi,

I just purchased the following PC componets and set them up but my monitor will not trun on when the computer is switched on.  Can anyone please help.
motherboard = MSI X58 Pro-E

-> CPU intel i7 950
-> Motherboard MSI X58 PRO-E  DrMOS
-> Memory Corsair, DDR3/1600, 2gb, 3
-> Video card MSI N210 1gb
-> Hard drive, WesternDigital,1TR 64mb cache, SATA
-> Operating system, not yet installed
-> Power Supply, CoolerMaster,460 watts

everythig is setup correctly i think.
I dont get any beeps when i turn the computer on,  even when i remove all 3 sticks of RAM i still dont get any beeps.
The CPU Phase LED's lights are all turn on(5).

Please help, iam very stressed and hope i can fix it on my own since the store that i purchaed it form is closed till monday.

 

[Wonkanoby]

powered by what

 

[kanonikos]

CoolerMaster,460 watts

 

[Wonkanoby]

do you have all the power feeds to board and vga if it takes one

stick with just on ram nearest to cpu for now

 

[kanonikos]

Solved it.
I mistakenly did not connect the ATX 8pin connector from the poer supply. 

It now starts up correctly.

thanks. 

 

[Frankenputer]

We've seen many forget to do that at these forums.

 

[HU16E]

do you have all the power feeds to board and vga if it takes one stick with just on ram nearest to cpu for now

Glad you got it working. Just to clarify, Pro-E board, if testing or for initial startup, single stick in the nearest 'black' dimm slot to the CPU.