The mainboard's LED firmware is abnormal

V

veysavorn202156802d8

New member
Joined
Oct 10, 2022
Messages
1
1665408326875.png
1665408326875.png
1665408371356.png
 
Sort by date Sort by votes
Upvote 0 Downvote
Alan J T said:
List your Full build
>>Posting Guide<<
>>Please read and comply with the Forum Rules.<<
Click to expand...

Main Board: MSI x570 carbon wifi pro
Bios Version: 7B93v1H
Video Card: Msi rtx 3060 12gb
PSU brand and model: THERMALTAKE Toughpower gf2 rgb 750w tt premium edition
CPU: Amd ryzen 5 2600
Memory: Thermaltake TOUGHRAM RGB DDR4 3600MHz 16 GB (8 GB x 2)
SSD/ HDD: KINGSTON_SA400S3 SSD
CPU COOLER: MSI MAG Series CORELIQUID 360R
Raid Card: none
Sound Card: none
Keyboard: MSI Vigor Gk50 LP
Mouse: Razar Naga Pro
Any Additional hardware plugged into your system: Msi GH50 Gaming Headset - Generic Webcam
OC: (No)
Operating System: Windows 11

Thanks for your reply
 
Last edited:
Upvote 0 Downvote
but when i go to livepdate-advanced, te MB LED FW update wont appear...

i try reinstal msi, downgrade to dragon center, i try the jt1 jumper method reseting the rgb, i upgrade the bios to last version but the update dont appear... can you seendme an standalone MBN LED FW installer for my mother pleace.
 
Upvote 0 Downvote
in system info say... LED FW Update(7B93), but verion installed is 00

screenshot atached
 

Attachments

  • htjf.png
    htjf.png
    62 KB · Views: 742
Upvote 0 Downvote
Will see if I have a copy if I dont I will have to request one may take a couple of days to arrange.
lwasko said:
in system info say... LED FW Update(7B93), but verion installed is 00

screenshot atached
Click to expand...
 
Upvote 0 Downvote
Alan J T said:
Please check PM
Click to expand...
Thanks for your help, but another problem.... error message in the msi led updater "connect to device Fail"

I follow the instructions: clear cmos, unplug power cord, turn off psu for 3 min, power on pc, close msi center, close all login apps, and run the upgrader.

screenshot atached
 

Attachments

  • Sin-título-1.jpg
    Sin-título-1.jpg
    299.7 KB · Views: 442
Upvote 0 Downvote
lwasko said:
Thanks for your help, but another problem.... error message in the msi led updater "connect to device Fail"

I follow the instructions: clear cmos, unplug power cord, turn off psu for 3 min, power on pc, close msi center, close all login apps, and run the upgrader.

screenshot atached
Click to expand...
Yep OK can you unplug any ARGB devices connected to the motherboard
Bit of a long shot but it may help and Avoid the need to RMA the board

Power off PC Unplug any RGB connections from motherboard power back on and boot to windows once in Windows restart PC and boot back to windows check LED firmware status. Run tool again.
You can also try a CMOS reset boot to windows and try the tool again but if that fails you will most likely have to RMA the motherboard.

For Cmos Reset power off PC unplug PSU hold down Computer power button for 3 to 4 seconds. Short the Jbat1 Pins or press the Clear Cmos button on IO panel for 15 to 30 seconds or remove Cmos battery for 15 minutes.
Power back up and boot to windows and try tool again.
 

Attachments

  • Screenshot 2022-10-25 162257.jpg
    Screenshot 2022-10-25 162257.jpg
    340.8 KB · Views: 366
Upvote 0 Downvote
i try this but still with no motherboard or jrainbow rgb control... just a predefined rainbow breath :(


im realy sad, my setup was green and black only... i read all related post on google and try everything i think...

i will try disconnect all argb and test, rma is not an option because i live in uruguay but i buy the motherboard in usa online... thanks again
 
Upvote 0 Downvote
lwasko said:
i try this but still with no motherboard or jrainbow rgb control... just a predefined rainbow breath :(


im realy sad, my setup was green and black only... i read all related post on google and try everything i think...

i will try disconnect all argb and test, rma is not an option because i live in uruguay but i buy the motherboard in usa online... thanks again
Click to expand...
MSI may do a Global warranty RMA won't know till you ask them >>How to contact MSI.<<
 
Upvote 0 Downvote
Wonder if MSI may have a tool to force flash the chip without having to boot in to windows something like the SVET Bios Flash tool perhaps.
But i'm sure they would have sent that if they had it.

Thinking here if you Uninstall MSI Center and associated RGB stuff and use something like Signal RGB instead.

No idea if it will work but it may get the RGB stuff working correctly again.

May be worth trying
 
Upvote 0 Downvote
problem solved... what I did was downgrade from windows 11 to 10, formatting and reinstalling everything and installing the fw update tool before the msi center... the compatibility with windows 11 is wrong...


thanks for all.... my pc is in peace, i hope op find a fix in all this info
 

Attachments

  • Imagen de WhatsApp 2022-10-27 a las 04.34.11.jpg
    Imagen de WhatsApp 2022-10-27 a las 04.34.11.jpg
    110.9 KB · Views: 389
Upvote 0 Downvote
Back
Top