veysavorn202156802d8
New member
- Joined
- Oct 10, 2022
- Messages
- 1
You will need to contact MSI or the retailer and get it replaced under warrantyHello, my motherboard is B660M Mortar Wifi. I have already cleared the CMOS, tried to install update 7D42 since it the one showed in system info but it is still showing like this.
21/05/2024 10:56:53 pm //==================== Start Update Tool ====================//
21/05/2024 10:56:53 pm // CheckModel - MB Manufacturer: Micro-Star International Co., Ltd.
21/05/2024 10:56:53 pm // CheckModel - MB Model: MAG B660M MORTAR WIFI DDR4 (MS-7D42)
21/05/2024 10:56:53 pm // CheckModel - Pass.
21/05/2024 10:56:53 pm // CheckConnect - Device not connected.
21/05/2024 10:56:53 pm // CheckBinfile - PID_BIN: 7D42
21/05/2024 10:56:53 pm // CheckBinfile - LED: v02
21/05/2024 10:56:53 pm // CheckBinfile - MB & Binfile match.
21/05/2024 10:56:53 pm // CheckBinfile - Pass.
21/05/2024 10:56:58 pm // CheckConnect - Device not connected.
21/05/2024 10:57:01 pm // CheckConnect - Device not connected.
21/05/2024 10:57:04 pm // CheckConnect - Device not connected.
21/05/2024 10:57:04 pm // CheckVersion - Device is not open.
21/05/2024 10:57:04 pm // Command - UI
View attachment 188749
When it is brand new, the LED is working fine for about a year. After series of bios updates on MSI Center app, this happened. Do you suggest to downgrade the BIOS version? Thank you.You will need to contact MSI or the retailer and get it replaced under warranty
Will not make any difference the LED Firmware is on a Different Chip and it has become corruptWhen it is brand new, the LED is working fine for about a year. After series of bios updates on MSI Center app, this happened. Do you suggest to downgrade the BIOS version? Thank you.
Não, na verdade quero dizer atualização do chipset.
Fiz a última atualização do BIOS há mais de uma semana. Percebi há 3 dias que o RGB das minhas ventoinhas frontais estava desligado e abri o MSI Mystic Light para redefini-las. Lá eu recebi o erro do LED FW.
Ao executar a etapa Suporte -> Avançado -> Verificação, percebi que não tenho os drivers de chipset mais recentes, então os instalei e reiniciei. Desde então, funciona bem. Não tenho ideia de por que isso aconteceu, talvez a reinicialização por si só tenha ajudado.
EDIT: você pode tentar executar uma atualização do BIOS via unidade USB, isso pode funcionar
Hello, you have shared the file with me, but it is not open, I have to request access.
Unusual may not have done it correctlyHello, you have shared the file with me, but it is not open, I have to request access.
Thanks for everything
Not good news then you will need to RMA that motherboard or have it replaced under warrantyThanks, I was able to download it, unfortunately I followed the steps again, uninstalling all the MSI software, clear cmos, and disconnecting argb and it does not allow me to flash to firmware.View attachment 188971
Is there a tool that may help me?
See PmI have the same problem. @ Alan J T, could you send me the most current version of LED FW Update for 7C59 (MSI TRX40 Creator)?
Check PMSame problem, eventually end up with the MSI Update Tool telling me "Connect to device Fail" with the v.00. Any chance the tools you've been providing are different than those on the official MSI site? My board is the PRO B760M-A WIFI DDR4, model number is 7D99
I'm getting the same message. How do I resolve this too? I recently had my MOBO MAG b550 tomahawk RMA serviced.