Upgrading RAM on GP66 11UG, NO XMP??

[euanpetrie]

So I upgraded my RAM to 32GB of the Crucial BLK2k16G21C16S4B DDR4 3200 1.35v (which everyone on here seems to be using). I have the latest BIOS E1543IMS.320 installed and when I am in bios, (right CTRL+SHIFT+LEFT ALT+F2) advanced settings there's no MEMORY menu under the overclock menu. So I cannot enable XMP at all... I also first tried on the bios I had previously which prompted me to upgrade to the latest. I can't even do manual settings for memory. CPU-Z is showing DRAM freq at 665.1MHZ and Windows 11 has the ram speed at 2667mhz under performance in task manager.

What is going on with my GP66 and why can't I easily just get these settings like the rest of the users on here??

 

[seba84_2005]

for xmp:

 

[tomjordan12156902d3]

for xmp:
View attachment 154183

Thanks for this, however when I get to the profile part I only see custom profile or default, no XMP profile I'm on a 11UH but havent upgraded my memory its just out of the factory. Can I still enable XMP somehow?

 

[seba84_2005]

tomjordan12156902d3 what ram you have?

 

[ahmadalradaida150f02cf]

Any help please, i have the same exact problem, my new ram Fury.

 

[Deleted member 976596]

Maybe your notebook only supports jedec and not xmp.

 

[miguelc8891]

I might be late posting, but in my case, on my laptop (MSI gp66 11UG), I also had to use the advanced settings (right CTRL+SHIFT+LEFT ALT+F2) and in system agent SA, I changed dynamic memory timings to enabled, then changed memory profile to custom and manually changed (tRAS, CAS latency, RAS, etc... as it is standard on my 3200MHz RAM) and changed the voltage to 1.35V. After restarting... 3200MHz appeared

 

[miguelc8891]