Usb Ports Not Working After Startup.

poker

New member
PRIVATE E-2
Joined
Nov 14, 2009
Messages
3
Hi guys, recently purchased a P55-CD53 mobo yesterday. After wiring up and starting up, i realised that my keyboard and mouse both plugged in via USB do not work after starting up.

Ok, you know when windows load up, if i enter the BIOS they're still working the keyboard that is, whereas the light in my mouse is still on. But after i boot up windows, at the loading screen with the WIN XP logo and the loading bar below, the light in my mouse goes off, and when windows starts up a few seconds later, both my keyboard and mouse cant be used. As with all my other usb ports. However, the ps2 keyboard port is still working, and when i check on device manager, under the category "other devices" of which usb, ethernet etc are listed, it is marked by a yellow colour question mark? Is this a driver problem if it isn't did i wire something wrongly? Im really clueless and exhausted regarding this matter.

Any help is much appreciated, Thank you for your time.
 
Install the latest Intel-Chipset driver package for your board.

If that doesn't help, clear CMOS with your PSU unplugged from A/C power and load "Optimized Defaults" in BIOS.

----------------------

Is this a fresh Windows Installation exclusively put on for this system configuration (well: Chipset)?  If it isn't, re-install the operating system.
 
Hi there Jack, is the driver package supposed to be provided in the installation cd that came with the mobo or am i supposed to get it from some online webbie?
 
Look here:

http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1845

--> "Intel 3/4/5 Chipset Drivers"

It is on the Driver CD somewhere, however, the one on the product page is newer and since you have to install it anyway, just take the latest one from there.
 
Back
Top