jbmx15db02ed
New member
- Joined
- May 14, 2025
- Messages
- 2
I am trying to overclock a few server/workstation cards from nvidia.
Namely the grid K1 and the tesla M10 , both are 4 gpu's on one card.
As soon as i apply the settings for the gpu speed , the settings are ignored and everything is put back to stock.
With the m10 i can lower powertarget without any problem and the card then also works slower.
The grid K1 is on w10 with latest 370.41 whql driver
For the m10 i need to use windows server 2012 with 376.84 driver ( only working windows driver i have found so far )
What could be the problem and how can this be solved?
Namely the grid K1 and the tesla M10 , both are 4 gpu's on one card.
As soon as i apply the settings for the gpu speed , the settings are ignored and everything is put back to stock.
With the m10 i can lower powertarget without any problem and the card then also works slower.
The grid K1 is on w10 with latest 370.41 whql driver
For the m10 i need to use windows server 2012 with 376.84 driver ( only working windows driver i have found so far )
What could be the problem and how can this be solved?
