X58 platinum SLI -No display

[ishotyaaa]

Problem: Nothing coming up on the screen.
Previously had X58 Pro-E with everything working fine until I had to RMA it due to socket burning out and nothing displaying. Nothing is still displaying after getting this new board. Gfx card works fine with other computers.

Equipment:
Mainboard: New X58 Platinum
PSU: CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply
RAM: G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model F3-10666CL9T-6GBNQ
CPU: Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W Quad-Core Desktop Processor BX80601930
w/ CORSAIR Cooling Hydro Series CWCH50-1 120mm High Performance CPU Cooler
GPU: XFX HD-585A-ZNBC Radeon HD 5850 (Cypress Pro) 1GB Black Edition 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported
HDD: SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
BIOS: Unknown at this point

 

[HU16E]

BIOS: Unknown at this point

This is critical to know. With a strong light & magnifier, take a look at the bios chip on the board & read what version it is.

 

[Henry]

That little rectangular spider looking chip w/sticker next to right side of CMOS battery.

Not exactly the same MB but close enough. On yours closer 2 o'clock position instead of 4 o'clock.