noncarbonatedclac159a02e3
New member
- Joined
- Jul 15, 2026
- Messages
- 4
For a little while now I've noticed that if I power down my computer, I can cold boot just fine.
If I reboot the computer (from the OS, or in the UEFI after clicking "save changes and reboot") it just hangs with 00 on the post code indicator, and the DRAM LED lit up.
I've updated to the latest bios in hopes it would resolve the issue, but it has not.
I tried updating using m-flash, as well as the bios flashback button on the board.
I've cleared CMOS many, many times.
any suggestions?
If I reboot the computer (from the OS, or in the UEFI after clicking "save changes and reboot") it just hangs with 00 on the post code indicator, and the DRAM LED lit up.
I've updated to the latest bios in hopes it would resolve the issue, but it has not.
I tried updating using m-flash, as well as the bios flashback button on the board.
I've cleared CMOS many, many times.
any suggestions?