Z68A-GD55/65 (G3)] BETA BIOS BIOS [E7681IMS.Nxx/P.xx releases

[Svet]

E7681IMS.N84 ==> E7681IMS.N87

1. Fixed Corsair K60 & Corsair K90 gaming keyboard,A4tech 7100 wireless combo keyboard and PRO Mechanical keyboard .
2. Fix hang at B2 with Intel Ethernet adapter card (I350-T2) on PCIE 1 or 4.
3. Fix S4 resume issue.

Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.N87 ==> E7681IMS.N88

1.Change item ??PCI ROM Priority?? default to ??Legacy ROM??


Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

P.xx Series[Supports Ivy Bridge]:

E7681IMS.P60 ==> E7681IMS.P71
You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

01. Fix vdroop offset control function can't work normally issue and modify code to avoid chip bug issue.
02. Add Gigadevice 25Q64BSIG" SPI ROM support.
03. Fix Adjusted DRAM Frequency and XMP info incorrect issue when use XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
04. Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and set different DRAM frequency.
05. Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory and XMP is enabled.
06. Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
07. Fix system hang on 0x55 issue when use SPD 800MHz memory and Sandy Bridge CPU.

Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

P.xx Series[Supports Ivy Bridge]:

E7681IMS.P71 ==> E7681IMS.P72
You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

01.Update CRB022a codebase.
02.Fix some item can not change value.
03.Fix Ipv6 function fail issue when update AMI CRB022a code.
04.Support Multi Language.
05.Fix item "Internel PLL Overvoltage" always Enable when over clock cpu ratio. 
06.Set item "Intel C-State" to enabled when use some special cpus
          (such as i5??C3475s which oc ability are limited) to over clock
          cpu ratio to the ratio higher than the ratio 4 cores can reach
          at the same time. 
07.Fix item "Adjust CPU Ratio" show error when adjust cpu ratio.
08.Fixed PLL function enable caused set tRTL timing hang issue.
09.Add OC Retry Counter Item.
10.Remove Secure Flash function.
11.Fix numeric del key can't entry setup.
12.Fix windows boot manager boot sequence show error issue when load default after. 
13.Fix system hang on 0x55 issue when use single side dual rank memory.
14.Fix Item "AMD Memroy Profile" can only choose "Disabled" option.
15.Fixed power button fail after resume from S3.
16.Support MSI Fast Boot.
17.Support check GOP driver in external VGA card.
18.Fix Secure boot manual logo test fail.
19.Add code for MSI Fast Boot.
20.Next boot after AC power loss run normal boot when fast boot enabled.
21.Support check GOP driver in external VGA card when fast boot enabled.
22.Modify 'Win 8 Configuration' to 'Windows 8 Configuration'.
23.Remove "Press <DEL> or <F2> to enter setup." from post.
24.MSI Fast Boot item show only when use user password.
25.Fix press F2 will reset after clear cmos.
26.Fix post hang A0/A2 issue when select WIN8 Boot.
27.Update 4.6.3.6_SMIFLASH_25.
28.Fix OEM Logo show error issue.
29.Set Fast Boot default to Disabled.
30.Hidden Windows 8 Configuration
31.Fix U62 Roccat Pyra Wireless Mouse issue in bios setup.

Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P72 ==> E7681IMS.P73
You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

01.Fix system can't install Infineon TPM software issue.
02.Update the CPU Micro Code M12306A9(015).
03.Fix UpdateBiosAndME function issue.
04.Add win8 gop solution.
05.Update CryptoPkg Module 010.
06.Fix can not adjust cpu ratio when item "Hyper-threading" set to Disabled and item "Active Processor Cores" set to 1.
07.Adjust CPU Ratio keyin function.



Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P73 ==> E7681IMS.P74

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

01.Update Realtek uefi driver.
02.Fix post code show error issue.
03.Fix Possible Black Screen issues with GOP Driver.
04.When you plug DVDROM as SATA 1 and plug SATA HDD as SATA 2 then system cannot
    Enter windows 7 Legacy OS after system restart.
05.Fixed it will hang 0xAD when use Non-GOP card and enable WIN8.
06.Update Post Time Tuning module 12.
07.Change "Boot option filter" to "UEFI and Legacy" when Win7 mode.
08.Fix it cannot enter UEFI Windows after restart OS when set admin Password.
09.Fine tune advanced timing(TWRDRDD) for memory frequency >= 2600Mhz.
10.Fix some vga card error under winxp os.
11.Fix issue:Roccat ISKU Keyboard can not work.
12.Add WIN8 Feature item.
13.Update ME8.1 1318.
14.Set Fast boot default to Enabled.



Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P74 ==> E7681IMS.P76

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

01.Fix USB Support and Fast Boot item help string show error issue.
02.Hidden some item when MSI Fast Boot item enabled.
03.Update BIOS Setup F12 key function.

01.Fix PCIE GEN3 display card issue.
02.Fix 'Integrated Graphics Share Memory' and 'DVMT Memory' item show incorrect.
03.Modify DMI type1 and DMI type 2 Manufacture from write once to unlimited.
04.Fix oc profile fail.
05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU
          and install two 4G memory.
06.Fix hang 0x2e when use CORSAIR CMGTX5 memory and XMP is enabled.

Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P76 ==> E7681IMS.P77

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below

  01.Fix  PCI or PCIE lan can not wakeup after onboard lan controller disabled.
02.Modify watchdog timer function code.
03.update realtek uefi pxe rom.
04.Fix NV's GOP crad will lag & freeze in setup when win8 Enable.
05.Fix press DEL key can't entry BIOS Setup when fast boot enabled after.
06.Modify fast boot default to disabled when win8 disabled.
07.Fix USB Support and Fast Boot item help string show error issue.
08.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
09.Fix SATA Devices Support function error issue.
10.Fix ps2 keyboard can't use in os when msi fast boot enabled.
11.Modify adjust CPU I/O voltage function code.



Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P77 ==> E7681IMS.P82

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below


01.Fix 'OC Retry Count' Function error when overclock BCLK.
02.Fix 'OC Retry Count' Function issue.
03.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system.
04.Add VGA hot-plug solution.
05.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear.
06.Fix post process, the phenomenon of the dialog box will appear if you press F12 Key some cases there will be the phenomenon of the crash.
07.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
08.Add EIP99882 to fix Win8 OS will hang 0D when set usb support to Partial Initial after reset.
09.Modify BIOS Setup USB Support item.
10.Fix whql test fail after support 18 languages.
11.Fixed Avexir 2400(patched before) S3 wakeup failed.

01.Fix system can not enter win8 OS after update BIOS from ME7 to ME8.


Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[Svet]

E7681IMS.P82 ==> E7681IMS.P80 [official]

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below


01.Hidden item Windows 8 Configuration.
02.Remove 'Update BIOS and ME' function.
03.Fix quit without saving will reset when connect a uefi os.
04.Add some SPI ROM Support.

01.Fix boot function cannnot show warning messages when setup data map is different between system BIOS and boot BIOS.


Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

 

[xmad]

E7681IMS.P80 ==> E7681IMS.P93 

VGA BIOS        : 2137
ME Version : 8.1.2.1318
RAID ROM : RST_11.5.0.1207
LAN OptionRom    : 2.41
Device OptionRom : N/A

You can re-flash to this version with regardless what's your current BIOS version installed N.xx or P.xx, just follow the exact described flashing instructions below


    01.Add solution to fix System hang up ??A2?? with some hard disk.
01.Fix Item "DRAM Frequency" will be always reset to Auto when bios reset.
            (only occured when using sandybridge cpu)
01.Remove M-Flash update BIOS and ME function from Recovery.
02.Fix it will hang when insert some intel lan..


Please note that flashing this release occurs entirely at your own risk!

For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!

*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.