- Joined
- May 13, 2014
- Messages
- 63
Config:
Z97 Gaming 7 BIOS ver 1.5
i5 4670k
Corsair Vengeance CMZ4GX3M1A1600C9 4gbx2
I been getting "E0" POST Code and system refuse to startup , after several retry and re-positing the RAM and using 1 stick, managed to get system up and running , in BIOS the Ram is detected as 4GB but the Board explorer showed the DIM slot as Empty ( I am using slot 4) and in MEMORY Z in Bios no additional RAM info is shown , after booting into windows these are the settings I see in CPU-Z ( The value changes sometime when I start and close CPUZ, like the SPD is shown empty now, and the timing value changed the second time I opened it ) , strange, so the ram is at fault here but I tried with the other sticks and still getting E0 also windows memory diagnostic showed no error, is it not strange both stick of ram being damaged at the same time? will a BIOS update fix this issue? ( system was working fine before but it all started with a few blue screen error and then E0)
http://imgur.com/7VMkBI3,bypu1K3,BngWzuF
Z97 Gaming 7 BIOS ver 1.5
i5 4670k
Corsair Vengeance CMZ4GX3M1A1600C9 4gbx2
I been getting "E0" POST Code and system refuse to startup , after several retry and re-positing the RAM and using 1 stick, managed to get system up and running , in BIOS the Ram is detected as 4GB but the Board explorer showed the DIM slot as Empty ( I am using slot 4) and in MEMORY Z in Bios no additional RAM info is shown , after booting into windows these are the settings I see in CPU-Z ( The value changes sometime when I start and close CPUZ, like the SPD is shown empty now, and the timing value changed the second time I opened it ) , strange, so the ram is at fault here but I tried with the other sticks and still getting E0 also windows memory diagnostic showed no error, is it not strange both stick of ram being damaged at the same time? will a BIOS update fix this issue? ( system was working fine before but it all started with a few blue screen error and then E0)
http://imgur.com/7VMkBI3,bypu1K3,BngWzuF