Zero fan function does not work smoothly on 5090 suprim graphics card, gaming and silent both bios same

K

kimyd900157102dc

New member
Joined
Feb 13, 2025
Messages
2
msi suprim 5090 and nvidia 5090 FE,Some 5090 graphics cards do not have the zero fan function at idle. Strictly speaking, the zero fan function works, but sometimes the fan runs at 30% speed.This did not happen with the 4000 series graphics cards.Please fix this quickly. This has been the case since version 572.16.
 
Sort by date Sort by votes
Did you disable Zero Frozr? I think you need to keep it as Enable so it works with afterburner.
Suprim 5090 must have Zero Frozr function, better check in MSI Center.
 
Upvote 0 Downvote
plutomate said:
Did you disable Zero Frozr? I think you need to keep it as Enable so it works with afterburner.
Suprim 5090 must have Zero Frozr function, better check in MSI Center.
Click to expand...
It was on .. but it seems "Fan Control".. the Third party software is not quit working in the same way as with the Suprim 4080super in this system... so... I will try running Zero Frozr with "Fan Control" off and see what happens in games
 
Last edited:
Upvote 0 Downvote
plutomate said:
Did you disable Zero Frozr? I think you need to keep it as Enable so it works with afterburner.
Suprim 5090 must have Zero Frozr function, better check in MSI Center.
Click to expand...
Ok just running MSI Center and Frozr on.. Still Fans are running 1000rpm max wit around 60C so about 30%.. Very Strange!!!???
 
Upvote 0 Downvote
30% around 60 degree C is about normal. If you wanna test it, use finger to force stop the fan (it won't kill the fan, no worry), and run furmark. when GPU temp goes up, you can see fan % in afterburner actually goes up (fan rpm stays 0 though cuz it's not spinning).
 
Upvote 0 Downvote
plutomate said:
30% around 60 degree C is about normal. If you wanna test it, use finger to force stop the fan (it won't kill the fan, no worry), and run furmark. when GPU temp goes up, you can see fan % in afterburner actually goes up (fan rpm stays 0 though cuz it's not spinning).
Click to expand...
Ok.. Great .. Thanks!!!!!!!!!!!!!!
 
Upvote 0 Downvote
Back
Top