Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: Z77A-GD65 watch out flashing the bios when use raid  (Read 1606 times)

0 Members and 1 Guest are viewing this topic.

kamikaasieTopic starter

  • **
  • Offline Offline
  • Posts: 1
Z77A-GD65 watch out flashing the bios when use raid
« on: 27-February-13, 07:10:05 »

Hi all ;- )
I just want to warn the people with the Z77A-GD65/45/80 board

after update bios with live update
If you use bios 10.5 and also use raid 0, then watch out to flash to 10.7, or higher, you will lost your raid mode, and it will tell you that windows is missing...
it will make the raid mode is gone and you will have 2 disks again , instead of 1 big disk..
so you think that you will need install windows again, but there is a luck this time, just set the bios slider on the motherboard to bios 2.
and all will work fine again...
greetings kamikaasie


  • MSI HQ Red Rockets Team Member
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: Z77A-GD65 watch out flashing the bios when use raid
« Reply #1 on: 27-February-13, 15:03:19 »

I reported this to MSI awhile back. It happened to mine every time. Had a non-member disk after the flash. :bonk:
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I
Pages: [1]   Go Up