Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]  (Read 16113 times)

0 Members and 1 Guest are viewing this topic.

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
[Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« on: 13-June-13, 10:48:29 »

E7845IMS.120 [Full Release Bios]

Me Version: 9.0.2.1345
VGA ROM: 2170
Raid ROM: 12.0.0.1783
Lan ROM: 2.1.1.5 (UEFI v1.1.0.4)
AS Media Raid Rom: .951

Flash Methods:
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.

Once the flash is complete, you must download and install the latest ME drivers.
http://us.msi.com/product/mb/Z87-GD65-GAMING.html

Bios flashing is done at your own risk!
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #1 on: 13-June-13, 10:52:44 »

E7845IMS.120 ===>E7845IMS.134 [BETA BIOS]

Me Version: 9.0.2.1345 ===> 9.0.10.1372
VGA Rom: 2170 ===> 2171
Lan Rom: 2.1.1.5 (UEFI v1.1.0.4)
As Media Rom: .951
   

Update codebase to 4.6.5.4_VEB_1AQQW025_m020b
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m146
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m148
          a. Auto adjust PCH 1.05 Voltage when adjust CPU Base Clock for 7811.
          b. Fix OC Button function not work in XP.
          c. Add Package C State item link code with Aggressive LPM item.
          d. Add During Boot option for CPU Base Clock Apply Mode.
          e. Modify Memory Fast Boot enabled function code.
          f. Modify current DRAM Timing code get from MC registers.
   02. Update SuperI/O - Nuvoton NCT6779D module to SuperI/O-Nuvoton NCT6779D_m018
          a. Add SuperI/O chach CPU TCC Target to peci Tbase.
   03. Update MSI Multi Language module to MSI_Multi_Language_m005
          a. Add FastBoot string to MSI Multi Language
        04. Default local firmware update interface(IFR) disable
        05. CMOS data should not be cleared after clear CMOS
        06. Patch smart boot code error.

Update codebase to 4.6.5.4_VEB_1AQQW025_m020a
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m145
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m147
   02. Update MFLASH module to MFLASH_m012
   03. Update OSSelect module to OSSelect_m016
   04. Update HardwareMonitor module to HardwareMonitor_m028
        05. Update MSI OEM Logo module to 4.6.3_OEMLOGO_003_m004
        06. Update OcInfo module to OcInfo_m008 
        07. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m120
        08. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m063
        09. Modify the PCH SATA Aggressive LPM Support item default value.     
        10. Patch use 5M ME system cause some USB HDD system hang "99" 
        11. Fix changelogo command "/T" can't use.
        12. Update "Fast Boot" help string for BIOS SPEC V8.12
        13. Update Fast Boot code for PTT_15

   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m144
   02. Update MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m146

   Update codebase to 4.6.5.4_VEB_1AQQW025_m020
   01. Update code base to 4.6.5.4_VEB_1AQQW025
   02. Update Intel Smart Connect Technology module to 4.6.5.3_ISCT41_110_010
   03. Update MsiOc - SharkBay module to MsiOc_SharkBay_m143
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m145
   04. Update MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m116
   05. Update MSI Multi Language module to MSI_Multi_Language_m004
   06. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m062
       & GSESetup module to SharkBaySetup_m017
       & Snapshot module to Snapshot_m010
   07. Update OSSelect module to OSSelect_m015
   08. Update FITC module to FITC_ME9_1.5M_1372_m010
   09. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m119
   10. Update OcInfo module to OcInfo_m007
   11. Update HardwareMonitor module to HardwareMonitor_m027
   12. Fix LSI MegaRAID card can't display UEFI message
   13. Fix next time system auto wake after system resume from PCIE LAN
   14. Fix SATA mode disable function is useless
   15. Fix GO2BIOS function is useless
   16. Patch onboard Realtek Lan still can wake up system when "Onboard LAN Controller" diasbled
   17. Update VBIOS to 2171


This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.

Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-MPOWER.html
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #2 on: 13-June-13, 10:55:07 »

E7845IMS.134 ===> E7845IMS.135 [BETA BIOS]

01. Fix that AFUD238 tool need /X command when user update to CRB25 BIOS from previous BIOS version.

Me Version: 9.0.10.1372
VGA Rom: 2171
Lan Rom: 2.1.1.5 (UEFI v1.1.0.4)
As Media Rom: .951



This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.

Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-MPOWER.html
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #3 on: 24-June-13, 10:57:04 »

E7845IMS.135 ===> E7845IMS.136 [BETA BIOS]

Me Version: 9.0.10.1372
VGA Rom: 2171===>2175
Lan Rom: 2.1.1.5 (UEFI v1.1.0.4)
As Media Rom: .951

   01. Update VBIOS to 2175
   02. Fix USB 3.0 is not usable



This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.

Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-MPOWER.html
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #4 on: 28-June-13, 12:52:44 »

E7845IMS.130 ===> E7845IMS.141 (BETA BIOS)

Me Version: 9.0.10.1372
VGA Rom: 2175
Lan Rom: 2.1.1.5 (UEFI v1.1.0.4)
As Media Rom: .951


   Update codebase to 4.6.5.4_VEB_1AQQW025_m020d
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m149
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m151
          a. Support auto adjust ratio voltage function code when adjust BCLK or ratio.
          b. Add code to auto adjust CPU IOD voltage when use G.Skill F3-3000C12D-8GTXDG memory and
             XMP is enabled for 7811 and 7815.
          c. Add token to set Core C State level.
          d. Fix CPU ratio not restore to default issue when adjust down CPU ratio and occur OC fail.
          e. Support GT ratio default OC function code.
          f. Remove Package C State item link code with Native ASPM item.
          g. Add checksum bytes to check memory changed.
          h. Extend some DRAM timing item's minimum option range.
          i. Modify Memory Fast Boot auto mechanism.
          j. Add Package C State item link code with Energy Efficiency Policy and Native ASPM item.
          k. Support DRAM Switching Frequency item for 7815.
          l. Fix BackSpace and Delete key not work issue in numeric keyin item.
          m. Modify CPU GT voltage warning value and fix item not grayout issue when OC Genie enabled.
          n. Modify CPU Ratio item link code with EIST and Turbo Boost function.
          o. Auto adjust CPU Base Clock when XMP profile speed above 2933MHz.
          p. Auto disable FIVRFaults when XMP is enabled.
          q. Fix system hang on 0x55 issue when set BCLK up to 167MHz and set DRAM Frequency above
             1333MHz.
          r. Fix sometimes CPU ratio set to auto after XTU tune some force reboot item.
          s. Fix system unstable issue when auto adjust Ring ratio.
          t. Fix frequency information incorrect issue when use non K sku CPU and adjust BCLK.
          u. Modify auto adjust voltage function code.
          v. Modify save CPU voltage function code.
          w. Add for HW full reset patch code to patch some HW issue. Token default is 0.
          x. Fix system OC fail issue when adjust BCLK to 167MHz and DRAM ratio is 1600MHz and boot
             on clear CMOS state.
   02. Update MSI XTU - SharkBay module to MSI_XTU_SharkBay_m112
       & MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m118
          a. Fix XMP 2800, XMP 2933 Memory Frequency show error in XTU tool.
          b. Fix sometime CPU ratio set to auto after XTU tune some force reboot item.
     c. Hidden XTU "tRC" item.
        03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m064
          a. Fix Boot device can't be change when load default.
          b. Provide left and right button pressing to switch between six main page blocks.
          c. Correct backspace / delete function in numberic component.
          d. Apply new color change rule of numeric component.     
   04. Update CpuZ module to CpuZ_m105
          a. Show the correct CPUVID.
   05. Update MemoryZ module to MemoryZ_m108
          a. Add Company "AMD"
        06. Update Fixed Boot Order module to 4.6.5.1_FixedBootOrder_15_m016
          a. Update to 4.6.5.1_FixedBootOrder_15
          b. Temporarily remove UEFI USB floppy boot device support
          c. Adjust the order of device enumeration for keeping compatibility with Btprtstr module
        07. Update IR3563A module to IR3563A_m108 and relative token
        08. Fix that AFUD238 tool need /X command when user update to CRB25 BIOS from previous BIOS version
        09. Fix PCIE OCZ SSD card can't into OS
        10. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m065
          a. Patch EIP102953 to support Windows to go.   
        11. Update Fixed Boot Order module to 4.6.5.1_FixedBootOrder_15_m017
          a. Patch EIP102953 to support Windows to go.
        12. Update Wakeup Event module to Wakeup Event_m011
          a. Modify resume from S3 can wake up when "Resume from S3/S4/S5 by PS2 Mouse or keyboard" of item setting disable.
        13. Support "Windows To Go" requirement.
        14. Set RTC default year "2013"

This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #5 on: 02-August-13, 11:25:37 »

E7845IMS.141 ===> E7845IMS.147 (BETA BIOS)

VGA BIOS         : 2175
GOP       : 5.0.1032
ME Version    : 9.0.10.1372
RAID ROM    : 12.0.0.1783
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951



Update code base form 4.6.5.4_VEB_1AQQW028_m022
        01. Update code base to 4.6.5.4_VEB_1AQQW028
   02. Update MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m158
        03. Update MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m120
          a. Update file to Intel RC 1.6.1
        04. Update CPU MicroCode - M3240661_0000000E(Intel(R) Haswell Perf Halo Processor C-0)
            Update CPU MicroCode - M32306C3_00000012(Intel(R) Haswell Processor C-0)
        05. Patch send ME END_OF_POST code
        06. Fix Windows8.1 WHCK WTG test fail
        07. Fix Windows8.1 WHCK XHCI USB Mapping test fail
        08. Patch SMCWPCI-G2 PCI wireless card yellow mark at device manager
        09. Fix Rocket 62X/62XM Sata PCIE card hang 92
01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m154
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m157
          a.Modify Legacy Tweaking function code and remove unuse code.
          b.Modify FIVR voltage item step to 1mV.
          c.Patch G.SKILL F3-2800C11Q-16GTXDG(11-14-14-35) boot fail and memtest unstale issue when
            XMP is enabled.
          d.Modify Dual Microcode function code for non K sku CPU.
          e.Patch G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) boot fail and memtest unstale issue when
            XMP is enabled.
        02. Update IR3563A module to IR3563A_m110 
          a.Modify CPU Phase Control APS setting for 7811.
          b.Always disable phase current fault function.
Update codebase to 4.6.5.4_VEB_1AQQW027_m021a
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m153
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m156
          a. Fix 7811 PCH 1.05 voltage coding error.
          b. Modify Dual Microcode function code and issue full reset when microcode changed.
          c. Fix system hang on 0x55 issue when DRAM frequency above 2000MHz and tCL is 6.
          d. Add Legacy Tweaking item and function code.
          e. Add more OC item check for watchdog function.
          f. Support OC retry function when occur unexpected reset after memory training.
          g. Rewrite some memory patch code to fix patched memory can't run memory fast boot issue.
          h. Open VCCIN Voltage item's low voltage option.
          i. Modify CPU phase control auto disable code for IR3563A.
          j. Patch system can't boot when use CMY8GX3M2A2133C11R & CMZ8GX3M2A2133C11R memory and XMP
             is enabled.
          k. Patch can't install OS issue when use ADATA AX3U1600GW8G9-2G DDR3 1600G(9) 8GX16 memory
             and enable OC Genie.
          l. Patch memtest error issue when use Corsair CMD16GX3M4A2666C11(11-13-13-35) memory and
             XMP is enabled.
          m. Patch Corsair memory when DRAM frequency above 2666Mhz.
          n. Fixed CMD16GX3M4A2666C10(10-12-12-31) run Memtest fail after update CRB 27.
          o. Fixed can't adjust CMD rate for DRAM when only 1 channel populated and frequency
             above 1866MHz.
        02. Update IR3563A module to IR3563A_m109       
          a. Add Switching Frequnecy item option and modify related setting.
          b. Support Phase Control APS function code.
        03. Disable to modify NB Verb table port B.
        04. Fix system can't display boot menu when press F11 with KINYO (KCR-312) cardreader.
        05. Patch USB_OC port fail when "Intel(R) Rapid Start Technology" enabled and resume from sleep mode.
        06. Patch CSM bom item behavior
01. Fix Mad cat R.A.T3 USB mouse jump in BIOS setup.
Update codebase to 4.6.5.4_VEB_1AQQW027_m021
        01. Update code base to 4.6.5.4_VEB_1AQQW027
   02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m152
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m155
          a. Add MS-4155 porting code for 7811.
          b. Support Dual Microcode function.
          c. Modify Core Ratio Limit function code.
          d. Open PCH 1.05 Voltage and PCH 1.5 Voltage item's low voltage option.
          e. Modify auto adjust IOA IOD offset voltage setting.
          f. Fix patched memory can't run memory fast boot although no memory setting changed.
        03. Update MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m119
          a. Update private file to SharkBay Codebase 027 Intel RC 1.6.0.
     b. Fix XTU_BET  show "tRC" error.
     c. Change "MSIOC_SharkBay" laber to "MSI_XTU_SharkBay_Private_119_2" Laber because CpuDxeFuncs.c not Private for msioc.
        04. Update MSI GSEII Common Private module to MSI_GSEII_Common_Private_m009
            & MSI GSEII SharkBay Private module to MSI_GSEII_SharkBay_Private_m013
          a. Include USB module updates.
          b. Update to support CRB 4.6.5.4_VEB_1AQQW027.
        05. Update MSI Multi Language module to MSI_Multi_Language_m006
          a. Update to support CRB 4.6.5.4_VEB_1AQQW027.
        06. Update uP1811 module to uP1811_m109
          a. Open PCH 1.05 Voltage and PCH 1.5 Voltage item's low voltage option for SharkBay platform.
        07. Update MSI OEM Logo module to 4.6.3_OEMLOGO_003_m005
          a. Change WIN8 logo.
        08. Update CPU MicroCode - M32306C3_00000010(Intel(R) Haswell Processor C-0)
        09. Always enable fast boot when MSI Fast Boot enabled.
        10. Support CSM bom item requirement
Update codebase to 4.6.5.4_VEB_1AQQW025_m020e
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m151
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m153
          a. Modify Core C State and Package C State auto setting.
          b. Fix system hang on 0x55 issue when DRAM frequency above 2000MHz and tCL is 7.
          c. Auto adjust CPU SA IOA IOD offset voltage when DRAM frequency above 2666MHz or CPU Base
             clock above 150MHz.
          d. Remove Internal VR OVP OCP Protection and Internal VR Efficiency Management function
             auto mechanism code at exit setup.
          e. Add golden board modify code to private file.
          f. Patch run memtest will reset issue when use G.SKILL F3-2400C11Q-32GXM memory and XMP is
             enabled.
          g. Fix XMP speed incorrect issue when use G.SKILL F3-2933C12Q-32GTXDG.
          h. Patch HyperPI 32M error issue when use Corsair CMD16GX3M4A2666C11 memory and XMP is
             enabled.
          i. Fix system hang on 0x23 issue when run memory fast boot and DRAM frequency is 2800MHz
             or 2600MHz.
          j. Add ODT config Rtt Wr and Rtt Nom control in setup.
        02. Update IR3563A module to IR3563A_m108
        03. Update GOP Driver to 5.0.1032
        04. Fix USB Port 20 mapped fail.
        05. Support use BCP set default boot sequence.
        06. Grayout item "Serial(COM) Port1" when use user password.
   

Please use Mode 2 of the forum flash tool or M-flash w/ me until further notice.
This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #6 on: 21-August-13, 09:47:08 »

E7845IMS.147 ===> E7845IMS.14C (BETA BIOS)

VGA BIOS         : 2177
GOP       : 5.0.1034
ME Version    : 9.0.20.1447
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951





   Update code base form 4.6.5.4_VEB_1AQQW028_m022a
        01. Update MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m121
          a. Modify "XTU_VOLTAGE_LIMIT" == 5 function code(when XTU_VOLTAGE_LIMIT == 5,
             no need to set MSIOC_OVERCLOCKING_LOCK_DEFAULT).
        02. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m066
       & MSI_GSEII_Common_Private_m010
          a. Fix re-plug USB keyboard will hang in BIOS setup menu.
          b. Patch send ME END_OF_POST code.
          c. Fix Mad cat R.A.T3 USB mouse jump in BIOS setup.
        03. Add item "XHCI Hand-off" & "EHCI Hand-off" for BIOS SPEC V814.
        04. Shared EHCI/XHCI ports for XHCI USB Mapping.   
01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m155
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m159
          a.Hidden Core Ratio Limit item when CPU not support turbo boost function.
          b.Fix system OC fail issue when BCLK use strap 1.25 or 1.67 and update to MRC 1.6.1.
          c.Modify BCLK OC related setting code when use strap 1.00.
   02. Update VBIOS to 2177
        03. Update GOP Driver to 5.0.1034
Update code base form 4.6.5.4_VEB_1AQQW028_m022b
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m156
          a. Modify Core C State auto setting in MP BIOS.
          b. Modify CPU phase control auto disable code for UP1649.
          c. Fix CPU IOA Voltage Offset can't set over +0.200V issue when use some CPU.
        02. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m067
          a. Fix mouse action is lag.
        03. "Integrated Graphics Share Memory" default to 32M when "Windows 8 feature" enabled.
   Update code base form 4.6.5.4_VEB_1AQQW028_m022c
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m157
          a. Fix OC item disappear issue when press mouse right key during set numeric keyin item.
          b. Modify OC mailbox voltage frequency porting sequence and remove IOA voltage offset patch.
          c. Modify Core C State auto setting in MP BIOS.
        02. Update uP1649 module to uP1649_m106
          a. Support Phase Control APS function code.
          b. Add UP1649 item block define for other module.
        03. Update FITC module to FITC_ME9_1.5M_1447_m011
        04. Change SATA Legacy ROM & UEFI Driver to 12.8.0.1016 PV (12.7.0.1936)
        05. Update OSSelect module to OSSelect_m017
          a. Fix Rocket 62X/62XM Sata PCIE card hang 92
          b. "Integrated Graphics Share Memory" default to 32M when "Windows 8 feature" enabled.
        06. Add token for XHCI USB Mapping patch code.
   01. Patch PS2 Keyboard random hang after into setup menu

Please use Mode 2 of the forum flash tool or M-flash w/ me until further notice.
This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #7 on: 26-September-13, 11:10:17 »

E7845IMS.150 ===> E7845IMS.162 (BETA BIOS)

VGA BIOS         : 2177
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951





   Update code base form 4.6.5.4_VEB_1AQQW031_m023b
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m161
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m164
          a. Modify Memory Presets DRAM voltage related code.
          b. Fix CPU Base Clock not restored to default setting issue when OC fail by reset retry.
          c. Auto adjust some voltage for non K sku CPU.
          d. Modify some OC memory patch solution.
          e. Add more Memory Presets option.
          f. Modify some code for GSE Favorites function.
        02. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m073
          a. Fix display setup menu path will cover each other when multi-languages.
        03. Update NTFS Driver module to NTFS Driver_m103
          a. Add solution to fix System hang up "A2" with some hard disk.

      Update code base form 4.6.5.4_VEB_1AQQW031_m023a
   01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m160
       & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m163
          a. Hidden some OC item for H81 model to follow H81 BIOS spec.
          b. Patch system run Memtest 5.0 test fail issue when use Kingston KH424C11T3K4/32X memory and XMP is Profile 1.
          c. Remove current voltage information in DRAM voltage item when model HW design not support sensor DRAM voltage circuit.
          d. Fix system hang on 0x55 issue when use G.SKILL F3-2933C12Q-16GTXDG(12-14-14-35) memory and XMP is enabled.
          e. Update XTU modify code to private file.
          f. Update golden board modify code to private file.
        02. Update MSI XTU - SharkBay module to MSI_XTU_SharkBay_m114
            & MSI XTU - SharkBay Private module to MSI_XTU_SharkBay_Private_m123
          a. Support NCT3933 DRAM Voltage related code.
        03. Update uP1811 module to uP1811_m111
          a. Remove unnecessary option string when item mode is numeric keyin.
          b. Remove unnecessary setup init string code when item mode is numeric keyin.
        04. Add NCT3933 module NCT3933_m103
          a. Remove unnecessary option string when item mode is numeric keyin.
          b. Remove unnecessary setup init string code when item mode is numeric keyin.
        05. Update USB modules to 4.6.3_USB_08.10.28
        06. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m072
           & GSESetup module to SharkBaySetup_m020
           & MSI GSEII Common Private module to MSI_GSEII_Common_Private_m012
           & MGSE - ClickBIOSUI module to ClickBIOSUI_m015
          a. Fix Data and Time item will overrid scrollbar.
          b. Fix mouse cursor will override BIOS setup path when press right button of mouse.
          c. Beta function(Fix favorites function).
          d. Update USB modules from "4.6.3_USB_08.10.27" to "4.6.3_USB_08.10.28".
          e. Fix Dialog Function don't show select item background.
        07. Update MFLASH module to MFLASH_m013
          a. Fixed MFlash fail when plug over 4 HDD device.
        08. Update GOP Driver to 5.0.1035
        09. Fixed CSM BOM network stack default error after clear CMOS.
   10. Add solution to fix System hang up "A2" with some hard disk.


This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #8 on: 04-October-13, 11:02:20 »


E7845IMS.162 ===> E7845IMS.163 (BETA BIOS)

VGA BIOS         : 2177
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951





      01. Patch SATA driver detection issue
   02. Fixed usb 3.0 device display in Devices and Printers.


This is a BETA bios. It's use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
[/quote]
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #9 on: 15-October-13, 14:13:10 »


E7845IMS.163 ===> E7845IMS.160 MP BIOS RELEASE

VGA BIOS         : 2177
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951





      Release MP Bios


This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #10 on: 23-October-13, 14:08:14 »

E7845IMS.160 ===> E7845IMS.172  :beta:

VGA BIOS         : 2177
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951





      Update code base form 4.6.5.4_VEB_1AQQW032a_m024a
        01. Patch support USB Device resume from S4/S5 cause Renesas/Asmedia/VIA USB3.0 controller
            shutdown form OS fail.
        02. Fix the issue that the system will hang 0xB4 or 0x99 when use customer usb cable or usb cardreaders.
        03. "XHCI Mode" default to "Auto"
        04. Update CPU MicroCode - M32306C3_00000017(Intel(R) Haswell Processor C-0)
        05. Modify CSM BOM setup DMI Information
        06. Fix it will boot overtime when connect high capacity storage HDD
        07. Update VBIOS 2178
        08. Update MsiOc - SharkBay module to MsiOc_SharkBay_m163
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m166
          a. Fix compile error issue when set token MSIOC_FIVR_VOLTAGE_LIMIT to 5.
          b. Fix Dual Microcode function fail when used microcode M32306C3_00000016 or newer.
          c. Fix system unstable issue when use G.SKILL F3-3000C12D-8GTXDG(12-14-14-35) memory and
             XMP is enabled for 7866.
          d. Modify Memory Presets function settings and item option layout.
          e. Support column is 11 bit size memory.
      Update code base form 4.6.5.4_VEB_1AQQW032a_m024
        01. Update code base to 4.6.5.4_VEB_1AQQW032a 
   02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m162
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m165
          a. Remove 4 DIMM Memory Presets option when model is 2 DIMM design.
          b. Add more Memory Presets option.
          c. Grayout DRAM Training item when user password installed.
          d. Fix system hang on 0x55 issue when use G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) memory and XMP is enabled.
          e. Modify DRAM frequency above 2000MHz and tCL is 7 patch solution.
          f. Patch MUSHKIN 991768 memory RST jump error for 7866.
          g. Patch ADATA AD3U1600W4G11-B memory RST jump error.
          h. Patch SWISSBIT MGU02G64E1BA2EP-BBR memory can't boot into OS issue.
          i. Fix system hang on 0xFF problem when system boot with some BCLK setting and issue the warm reset.
          j. Modify some coding syntax avoid compile fail.
        03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m074
           & GSESetup module to SharkBaySetup_m021
           & MSI GSEII Common Private module to MSI_GSEII_Common_Private_m013
           & MSI GSEII SharkBay Private module to MSI_GSEII_SharkBay_Private_m015
          a. Fix setup item (IEEE1394 and USB30) can be select when user password.
          b. Update to support CRB 4.6.5.4_VEB_1AQQW032.
        04. Update OSSelect module to OSSelect_m020
          a. Base on CRB32 to update SecurityBootFlavor version 22 to file for Windows 8 Configuration item.
        05. Update MSI Multi Language module to MSI_Multi_Language_m008
          a. Add SecureBootMode.uni string for CRB32.
        06. Update uP1811 module to uP1811_m111
          a. Modify VR 12VIN OCP Expander item help string for SharkBay platform.
        07. Patch SATA driver detection issue and add item to control.
        08. Support USB Device resume from S4/S5
        09. Modify some item string for BIOS SPEC V8.16



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #11 on: 01-November-13, 13:15:56 »

E7845IMS.172 ===> E7845IMS.173  :beta:

VGA BIOS         : 2178
GOP       : 5.0.1035
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951






   Update code base to 4.6.5.4_VEB_1AQQW032a_m024b
        01. Update FITC module to FITC_ME9_1.5M_1482_m013
          a. Update ME to v9.0.30.1482
        02. Update OSSelect module to OSSelect_m021
          a. Fix SecurityBoot of item default value.
        03. Fix Boot Option error when install PE sata device.
        04. Patch USB Device resume fail from Win8 shutdown when turn on fast startup.
        05. Update Wakeup Event module to Wakeup Event_m012
          a. Fixed AMIBCP can not adjust item.


This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #12 on: 13-November-13, 13:14:12 »

E7845IMS.173 ===> E7845IMS.174  :beta:

VGA BIOS         : 2178
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951






      Update code base to 4.6.5.4_VEB_1AQQW032a_m024c
   01. Downgrade FITC module to FITC_ME9_1.5M_1462_m012
          a. Downgrade ME to v9.0.21.1462
        02. Update OSSelect module to OSSelect_m022
          a. Fix setup item (Secure Boot Mode) can be select when user password.
        03. Update OEMDMI module to OEMDMI_102
          a. Add new table for AP detect.
        04. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m124
          a. Show OCProfile name when save ROMHOLE.
          b. Keep OCProfile name when save ROMHOLE.
        05. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m075
           & GSESetup module to SharkBaySetup_m022
          a. Support show OCProfile name for multi-languages.
          b. Show OCProfile name when save ROMHOLE.
          c. Fix setup item (User Password) can be select when user password.
        06. Update MsiOc - SharkBay module to MsiOc_SharkBay_m164
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m167
          a. Auto run Dual Microcode function when Enhanced Turbo is enabled.
          b. Modify Memory Presets function settings.
          c. Fix memtest fail issue when use G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) memory and XMP is enabled.
          d. Fix memtest fail issue when use Apacer AHU04GFA60C9Q1D memory and XMP is enabled.
   07. Add new bom : Z87-S03


This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #13 on: 22-November-13, 11:03:32 »


E7845IMS.174 ===> E7845IMS.182  :beta:

VGA BIOS         : 2178
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951






   Update code base form 4.6.5.4_VEB_1AQQW032a_m024e
        01. Fix RocketRaid 2310 and RocketRaid 620 raid card install OS fail when Legacy mode.
        02. Modify "Resume From S3/S4/S5 by USB Device" item help string.
        03. Modify item string for BIOS SPEC V8.17
          a. Modify "Windows 8 Configuration" to "Windows 8/8.1 Configuration"
          b. Modify "Windows 8 Feature" to "Windows 8/8.1 Feature"
        04. Patch multi bom "DMI Information" type 2 data error.   Update code base form 4.6.5.4_VEB_1AQQW032a_m024d
        01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m165
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m168
          a. Disable Dual Microcode function support.
          b. Modify Memory Presets function settings and modify option layout for 7887.
          c. Modify CPU Ratio Mode setting to Fixed Mode when run OC Genie function.
          d. Fix system OC fail and unstable issue when use G.SKILL XMP 2800MHz memory and XMP is
             enabled and memory config is dual channel with one DIMM per channel.
          e. Modify get current CPU ratio code read from status register.
          f. Add code to check SA voltage and IOD voltage is stable before memory init.
          g. Patch system run Memtest test fail issue when use Kingston KH424C11T3K4/32X memory and Profile 1.
          h. Patch system run Memtest test fail issue when use G.SKILL F3-19200CL8D-4GBPID/2GX memory
             and XMP is Profile 1.
        02. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m126
          a. Fix OCProfile name format.
          b. Fix OCProfile savename (Date and Time) when user don't set name.
        03. Patch USB Device resume fail from OS shutdown when MSI Fast Boot enabled.
        04. Add build information parameter
        05. Add ROM version for AP detect.
        06. "Boot Mode Select" item show only when "Windows 8 Feature" enabled.
        07. Fix it can not detect VGA driver when use Korea GT630 card.
        08. Update CryptoPkg module to 4.6.5.x_CRYPTOAPI_018
          a. Fix Win8.1 WHQL secure boot manual logo test fail(load key and into pen driver fail)
        09. Add "DMI Information" item support.
        10. Add "GO2BIOS" item help string.   01. Fix Overclocking Profile 2 string show error.


This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

Svet

  • T9246ED
  • Administrator
  • *****
  • Offline Offline
  • Posts: 74410
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #14 on: 10-December-13, 05:47:22 »

E7845IMS.182 ===> E7845IMS.185  :beta:


Changes:

Update code base form 4.6.5.4_VEB_1AQQW032a_m024f
        01. "XHCI Mode" default to "Smart Auto"
        02. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m076 & MGSE - ClickBIOSUI module to ClickBIOSUI_m016
          a. Fix edit popup Support % character.

       01. Fix DrawFlashBar show '%d%%' .

       Update code base form 4.6.5.4_VEB_1AQQW032a_m024g
        01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m166
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m169
          a. Add token to change auto adjust PCH 1.05 Voltage setting.
          b. Fix system OC fail issue when BCLK use strap 1.25 or 1.67 and update ME to 1482 or newer.
          c. Modify OC Genie function related code for 7887 PCB 1.1.
          d. Modify some file include path for CrescentBay source code compatible.
          e. Hidden Package C State item's C7 and C7s option when CPU not support C7 state.
          f. Fix system hang on 0x23 when use XMP 3000 memory and XMP is enabled and BCLK is 100MHz.
          g. Patch XMP 3000 timing tCL to 12 and improve Memtest stability when use Apacer 4GB UNB
             PC3-24000 memory when XMP is enabled.
          h. Patch system run Memtest test fail issue when use G.SKILL F3-2933C112Q-32GTXDG memory
             and XMP is enabled.
          i. Modify get current CPU ratio related code when use Non K CPU and adjust CPU ratio above
             four core turbo ratio.
          j. Fix Turbo Boost item should not be displayed issue when use not support Turbo Boost CPU
             and set CPU ratio item.
          k. Fix adjust CPU Core Voltage function abnormal issue when use Non K sku CPU and Dual
             Microcode function is not support.
          l. Hidden some CPU Ratio option on H/B chipset when Dual Microcode function is not support.
        02. Update MGSE - ClickBIOSUI module to ClickBIOSUI_m018
          a. Fix USB mouse hotplug is lag.
        03. Patch system hang on post when use GOP VGA card & "Windows 8/8.1 Feature" enabled.   
        04. Patch "DMI Information" UUID show N/A.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #15 on: 27-December-13, 13:17:18 »

E7845IMS.185 ===> E7845IMS.191  :beta:

VGA BIOS         : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951


Changes:

Update code base form 4.6.5.4_VEB_1AQQW034_m025
        01. Update code base to 4.6.5.4_VEB_1AQQW034 
        02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m168
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m171
          a. Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz.
          b. Fix system can't boot issue when use Haswell ES2 B0 stepping CPU.
          c. Add OC Genie DRAM Voltage related code for use NCT3933 model.
          d. Add token to change OC Genie GT voltage setting.
          e. Fix OC Genie power limit setting incorrect issue after reboot system.   
          f. Add code to turn off OC Genie Button LED when disable OC Genie by BIOS OC Genie item.
          g. Display VT-D item in CPU Features group when chipset supported.
          h. Update private file to SharkBay Codebase 031 Intel RC 1.7.0.
        03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m080
           & MGSE - ClickBIOSUI module to ClickBIOSUI_m018
          a. Fix HotKey F8/F9 support load/save profile from romhole.
          b. Add load profile when clear cmos or OC fail.
          c. Fix "Full Screen Logo Display" item can't be changed when clear CMOS.
        04. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m128
          a. Fix HotKey F8/F9 support load/save profile from romhole.
          b. Support load profile when clear cmos or OC fail.
        05. Update GBI module to GBI_m021
          a. skip onboard VIA HUB 0x2109
        06. Update PostMsg Module to PostMsg_m106
     a. Support load profile when clear cmos or OC fail.
        07. Update HardwareMonitor module to HardwareMonitor_m030
          a. modularize Hardware SD file and uni
        08. Update uP1649 module to uP1649_m108
          a. Patch minimum load issue when resume from S3 (only for 7887).
        09. Update FITC module to FITC_ME9_1.5M_1482_m013
          a. Update ME to v9.0.30.1482
        10. Update Powerloss module to Powerloss_m108
          a. Update string for Russian.
        11. Update MSI_TCG module to 4.6.4.0_TCG_42_m007
           a. Update to new nersion TCG_42.
        12. Update VBIOS 2179 & GOP Driver 5.0.1036
        13. Fix RocketRaid 2310 and RocketRaid 620 raid card,the Legacy mode install OS fail.
        14. Patch muti-bom "DMI Information" error.
        15. Fix the OC_switch LED will be power on under S5 state.
            (when HW OC_GENIE button is enable and OC Genie Function Control is set to "By BIOS Options".)
        16. Add VGA GOP information for AP
        17. Update NCT3933 module NCT3933_m104
           a. Support DRAM PCH VREF PLX voltage item code for intel 9 series chipset model CrescentBay platform.
        18. Fix DMI type0 16M SPI ROM "BIOS ROM Size" show 8192KB.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #16 on: 21-January-14, 12:40:46 »

E7845IMS.191 ===> E7845IMS.192  :beta:

Latest as of 02/19/2014

VGA BIOS         : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951


Changes:

Update code base form 4.6.5.4_VEB_1AQQW034_m025a
        01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m169
      & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m172
          a.Modify auto adjust VCCIN voltage code for 9 series model.
          b.Modify auto adjust CPU Vdroop Offset Control code.
          c.Modify DRAM Frequency item code to avoid display two DRAM Frequency item problem.
          d.Remove the force one DIMM per channel related code from MRC.
          e.Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz when use
            non K sku CPU.
          f.Fix BCLK setting not be apply issue when use XMP 3000MHz memory and XMP is enabled and
            boot on clear CMOS state
          g.Fix XMP timing incorrect issue when use XMP 3000MHz memory and BCLK is 102.30MHz and
            DRAM Frequency is 2933MHz.
          h.Fix current CPU Ratio incorrect issue when OC Genie started by OC Genie Button at BIOS
            first boot.
          i.Modify Apacer 4GB PC3-24000 memory patch solution.
          j.Add code to adjust ISL6388 PWM setting when over voltage.
          k.Support DRAM Phase Control item and DRAM Switching Frequency item for 7888.
          l.Correct token to change OC Genie GT voltage setting.
          m.Remove extra % symbol from percentage options.
   02. Update IR3563A module to IR3563A_m112
          a.Add multi language help string.
          b.Remove extra % symbol from percentage options.
   03. Update uP1649 module to uP1649_m109
          a.Add multi language help string.
          b.Remove extra % symbol from percentage options.
        04.Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m081
          a.Fix press BackSpace is not active when edit item.
   05.Update OSSelect module to OSSelect_m023
          a.Win7 device manager shows error message"!"on the 2nd VGA card
       "This device cannot find enough free resources that it can use. (Code 12)"
   06.Update OemInt15 module to OemInt15_m007
   07.Fix s5 auto wake up when enabled 'resume By onbaord lan'
   08.Remove useless SLI test key
   09.Fix UUID DMI imformation reverse.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #17 on: 12-February-14, 14:27:18 »


E7845IMS.192 ===> E7845IMS.193  :beta:

Latest as of 02/12/2014

VGA BIOS         : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951


Changes:

Update code base form 4.6.5.4_VEB_1AQQW034_m025b
   01. Update MsiOc SharkBay Module m170
      & Update MsiOc SharkBay Private Module m173
     a.Add some common code in module.
     b.Support PV3203 voltage module related code.
     c.Fix OC Genie function not work issue when OC Genie started by OC Genie Button and enter
       in BIOS setup load default save exit.
     d.Modify OC Genie Gear 2 DRAM Frequency setting to follow BIOS spec.
     e.Patch system can't boot when use V-Color TD4G8C9-OC18A memory and XMP is Profile 1.
     f.Patch memtest fail when use Kingston KHX1600C9D3K6/24GX(9-9-9-27) memory and XMP is enabled.
   02. Update Aptio NCB ROM Hole_m129
     a.Fix build fail when disable MSIGSE_SUPPORT token.
        03. Add empty SLI key.
        04. Add "Integrated Graphics Share Memory" item vale 512M & 1024M.
   05. Update MSILANRom module to MSILANRom_m002.
          a. Update Realtek LAN driver version.
             Atheros LAN version: LxUndiDxe-IA32-v1.1.0.4.efi
                                        LxUndiDxe-X64-v1.1.0.4.efi
             Realtek LAN version:  RtkUndiDxe_2026_64.efi
                                        RtkUndiDxe_2026_32.efi
        06. Add Realtek LAN PXE OROM v258.
   07. Fix mouse is lagging during install windows When C6/C7/C7s is enabled.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

Svet

  • T9246ED
  • Administrator
  • *****
  • Offline Offline
  • Posts: 74410
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #18 on: 04-March-14, 08:28:40 »

E7845IMS.193 ===> E7845IMS.194  :beta:

VGA BIOS         : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951


Changes:

Update code base form 4.6.5.4_VEB_1AQQW034_m025d
   01. Associate item  SATAHotPlug and ExternalSata.
   02. Patch system can't boot when use Haswell-R CPU.
   03. Change BTCG default to disable.
   04. Update MSI_XTU_SharkBay_m116.
       a.Fix SA,IOA,IOD can't be set to default when load Default profile with XTU tool.
   05. Update MsiOc - SharkBay module to MsiOc_SharkBay_m172
      & Update MsiOc SharkBay Private Module m174.
          a. Patch mouse lag issue at OS installation when model have ASM1061 chip and Package C State set to C6 or C7.
          b. Support load last good setting function when OC fail.
          c. Support GSE block move select item function in DRAM timing group.
          d. Modify OC Genie Function Control related code to fix CPU Ratio keep on default issue after Load OC Profile.
          e. Fix Adjusted DRAM Frequency information incorrect issue when XMP enabled via XMP Button.
          f. Add token to change some item default setting for customer request.
          g. Modify load OC Profile function when OC fail related code.
          h. Support Enhanced Interleave item and Rank Interleave item in Advanced DRAM Configuration Group.
   06. Update 4.6.4_UEFI_NETWORK_STACK_II_10.
   07. Change some item string.
   08. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   09. Fix Intel (R) Rapid Start Technology function fail .



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged

xmadTopic starter

  • MSI HQ Red Rockets Team Member
  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 8587
  • Salisbury MD
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #19 on: 11-April-14, 09:21:02 »


E7845IMS.194/ 190===> E7845IMS.1A1  :beta:

VGA BIOS         : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom    : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Asmedia RAID ROM : 0.951


Changes:

            01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
            02. Fix Intel (R) Rapid Start Technology function fail.
            03. DMI Link ASPM default to disable.
            04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
         a. Fix FixedBootOrder change boot option priorities issue.
            05. Fix WHQL test PC Resume fail.
            06. Fix some DMI string writeonce issue.
            07. Change solution about associate item SATA Hot-Plug and External Sata.
            08. Fix Serial(COM) Port1 Settings error.
            09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
                    & Update MsiOc SharkBay Private Module m177
         a. Patch XTU can't set BCLK ratio issue.
         b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
         timing save exit then change one memory to channel A.
         c. Add new token to control OC page spec.
         d. Modify EIST item and Turbo Mode item related code in OC page.
         e. Move Core Ratio Limit item to OC main Page and modify related code.
         f. Add CPU Ratio Apply Mode item and related code.
         g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
         h. Support multi step option select mode for Memory Try It ! function.
         i. Move some function struct define and table define to new file.
         j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
         above default GT ratio and then enter setup change ratio to Auto.
            10. Remove XHCI USB Mapping patch code.
            11. Fix can't boot to OS after enter boot menu without choose any option.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Make sure to select a "best" answer once your issue has been resolved!
Mainboard: X79A-GD65 (8D)
CPU: I7-3930K
Setting: 4.5Ghz enhanced turbo w/ speed step functioning.
Memory: Corsair Dominator 2133 CL:9  1.5v 4x4gb
Setting: 2400 CL:10
VGA: 2 x GTX 780Ti Gaming 3G (SLI)
No Overclock other than default
PSU: Corsair AX1200i 12v: 100.1 Amps
SSD: Corsair GS 256GB
Corsair Link
Cooling: Corsair H100I

Svet

  • T9246ED
  • Administrator
  • *****
  • Offline Offline
  • Posts: 74410
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #20 on: 16-May-14, 07:08:52 »

E7845IMS.1A1 ===> E7845IMS.1A3  :beta:

Changes:

01. Update code base to 4.6.5.4_VEB_1AQQW036.
        02. Update MsiOc SharkBay Module m180
            & Update MsiOc SharkBay Private Module m183
            a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
            b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
            c. Fix some coding define error.
            d. Patch system sometimes always reset at POST issue when run memory fast boot.
            e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
            f. Modfiy current VREF voltage dispaly function code.
            g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
               enabled and modify auto adjust voltage code for 7914.
            h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
        03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
            support Optimus and set primary video adapter to IGD to Boot up with IGD output.
        04. Remove PC Resume fail solution.
        05. Fix M-Flash Boot/Recovery Issue.
        06. Patch setup select Save & Exit random hang.
   07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
   08. Update MSI_XTU_SharkBay_m118.
            & MSI_XTU_SharkBay_Private_m125.

01. Update CPU MicroCode - M32306C3_00000019(Intel(R) Haswell Processor C-0).
        02. Fix system hang with POST code A2 when using WD 4TB WD40EZRX-00SPEB0 with exFAT format.
        03. Enable the control of Active State Power Management on SA side of the DMI Link.
        04. Fix boot menu function(F11) still detected IPV4 and IPV6 when enable Network stack and
            then disbale Onboard LAN Controller.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged

Svet

  • T9246ED
  • Administrator
  • *****
  • Offline Offline
  • Posts: 74410
Re: [Z87-GD65 Gaming] UEFI BIOS [E7845.1xx]
« Reply #21 on: 29-July-14, 06:01:45 »

E7845IMS.1A0 ===> E7845IMS.1B2  :beta:

Changes:

 1. Remove XHCI USB Mapping patch code.

 01. Fix system can't auto sleep after resume from S3 by wake on lan.
         02. Update MsiOc SharkBay Module m192 & Update MsiOc SharkBay Private Module m188
          a. Fix OC Genie CPU Power Limit setting incorrect issue after reboot system twice.
          b. Fix setup related NVRAM variables are not accessible at runtime.
          c. Modify BCLK use clockgen range code for 9 series OC model.
          d. Modify MsiOcMemSPD NVRAM data variable GUID.
          e. Fix XTU related code coding error issue.
          f. Ignore some MRC training error.
          g. Modify some MRC training code improve DRAM OC ability.
          h. Add ODT Finetune and Rx Equalization and VTT ODT item and function code.
          i. Modify some Memory Presets setting for 9 series OC model.
          j. Fix EIST function not work issue when use non turbo CPU.
          k. Add data struct alignment define to avoid get variable may be incorrect problem.
          l. Always install ICC library protocol on 8 series codebase.
        03. Fix sytem can't reset when use Ctrl+Alt+Del at BIOS or DOS with Microstep Keyboard.
        04. Fix the removable USB icon can't be shown when using Front Panel USB 2.0 port under
            Windows 7.

   update from 4.6.5.4_VEB_1AQQW036_m026e to m026f
   01. Update MsiOc SharkBay Module m191
          & Update MsiOc SharkBay Private Module m187.
          a. Support some voltage item for 2/3/4 phase model when use G3258 CPU.
          b. Fix CPU ratio not be apply at POST issue when use G3258 CPU on H/B chipset.
          c. Support overrride microcode version for show in BIOS setup.
        02. Support dxdiag show BIOS version.
        03. Define item "BIOS Mode" for system tuning.
        04. Patch PS2 device detect time when "MSI Fast Boot" enabled.
        05. Patch Dare-U Soldner X Himmelssturmer PS2 keyboard can't detect.
        06. Fix OC Genie CPU Power Limit setting incorrect issue after reboot system twice.
        07. Fix Boot Override sequence changed when load default.



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged
Pages: [1]   Go Up