Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: X99S GAMING 7 BETA UEFI Version [E7885IMS.Hxx Releases]  (Read 3075 times)

0 Members and 1 Guest are viewing this topic.

SvetTopic starter

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Offline Offline
  • Posts: 73022

E7885IMS.H30 ===> E7885IMS.H42  :beta:

Changes:

1.Add solution to support M.2 Samsung XP941 (MZHPU128HCGM) device.
     Add PcieSataController_01 module.
     Update SataExpress_m003 module.
     Update 5.004_AHCI_04 module.
   2.Update GBI_m017 module.
   3.Update MemoryZ_m009 module.
   4.Fix NV Titan VGA 3Dmark issue.
   5.fix mouse scrolling function.
   6.Adjust USB s5 wakeup function.   
        7.Patch current CPU ratio information incorrect issue in CPU Specifications.
        8.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
        9.Add some common code and hook.
        10.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
          load BIOS default setting.
        11.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
        12.Fix Turbo Boost behavior abnormal issue when resume from S3.
        13.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.


This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged

SvetTopic starter

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Offline Offline
  • Posts: 73022
Re: X99S GAMING 7 BETA UEFI Version [E7885IMS.Hxx Releases]
« Reply #1 on: 07-October-14, 06:00:21 »

E7885IMS.H42 ===> E7885IMS.H43  :beta:

Changes:
1.Update GBI_m018 module.
     1.Fix the wrong spelling for Unknown Vendor.
     2.Fix the wrong spelling for Keyboard.
   2.Update RomHole_m016 module.
     1.Fix don't save OcInfoPassToSetup data in OCProfile to avoid OC function fail.
   3.Update MFlash_m018 module.
     1.Fixed MSI's recovery GUID conflicted with AMI. 
     2.Set a variable to notify OC to run OC default setting when updating BIOS.
     3.Changed the recovery mode from AMI's rule to MSI's rule. 
     4.Modified the label name of MFlash sample code
     5.Fixed incorrect memory assignment
   4.Update ISL6388_m204 module.
     1.Modify PCIE base address related code.
   5.Update MsiOc_LituyaBay_m125 module.
     A.Modify auto adjust CPU Over Temperature Protection related code.
          B.Let system run OC default setting when MFlash updating BIOS.
          C.Fix Memory Try It item string incorrect issue when change to other language or load from
            OC Profile.
          D.Modify some item help string and add multi language string from BIOS spec 955.
          E.Modify auto adjust tREFI timing related code.
   6.Update MsiOc_LituyaBay_m124 module.
     1.Patch current CPU ratio information incorrect issue in CPU Specifications.
          2.Fixed CPU Ratio keep 12x issue when resume from S3 and CPU ratio is fixed mode.
          3.Fixed Mem patch group can't show in setup and hide show patch memory information.
          4.Add memory Chip ID support.
          A.Add some common code and hook.
          B.Fix Memory Try It item string incorrect issue when selected Memory Try It setting then
            load BIOS default setting.
          C.Correct maximum memory clock speed and configured memory clock speed in SMBIOS Type 17.
          D.Modify some DRAM timing auto setting.
          E.Patch memtest fail issue when use Kingston HX424C12PBK4/32 memory and XMP is enabled.
          F.Fix watchdog function not work issue when BCLK OC fail system hang on 0xFF.
          G.Add more option for CPU Over Temperature Protection item and show warning message if set
            over 105 degree and modify item help string.
          H.Fix Turbo Boost behavior abnormal issue when resume from S3.
          I.Fix Adjusted Ring Frequency information incorrect issue when set CPU Ratio and set BCLK.      
   7.Update NCT5605_m007 module.
     A.Fixed when EuP 2013 enable, CPU Fan can't work after S4.
       Disable NCT5605Smi_SUPPORT.   



This Bios use is done solely at your risk!Flash Method

1.) >>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Logged

flobelix

  • MSIHQ Red Rockets Team Member
  • Global Moderator
  • *****
  • Offline Offline
  • Posts: 34005
  • 微星科技
    • Afterburner New Features Introduction | MSI
Re: X99S GAMING 7 BETA UEFI Version [E7885IMS.Hxx Releases]
« Reply #2 on: 02-November-14, 06:58:06 »

E7885IMS.H40 official ===> E7885IMS.H51  :beta:

Changes for E7885IMS.H51:

1.Add NVMe module.
   2.Update MsiGseSources_m033 module.
     1.Fix from "Save and Exit" page to boot will show "Save configuration and reset?"
       message box when first burner BIOS.
   3.Update GBI_m020 module.
     1.Add Vendor ID : Samsung and PLAXTOR.
       Add Classcode base on PCI code SPEC.
   4.Update MFlash_m021 module.
     1.Fixes OC default setting variable can not be cleaned when set BIOS ROM switch to another.
     2.Support the multi BIOS switch.
   5.Update 5.004_FixedBootOrder_04_m012 module.
     1.Fix Software Application(MMTools) can't write back.
   6.Update Golden board MsiLituyaBayCrb012_m014 module.
     1.Add Golden_Board.dec and Golden_Board.dsc.
   7.Update MSIOC MsiOc_LituyaBay_m126 module.
     A.Fix system can't boot issue when use desktop Haswell-E ES2 CPU.
          B.Modify CPU Base Clock related setting when set CPU Base Clock to 125.03MHz.
          C.Support OC retry function when occur unexpected reset during memory training.
          D.Add Memory Try It setting and modify some option settings.
          E.Patch system hang on 0xBF issue when limit overclocking system BSOD reset after run some
            benchmark in OS.
          F.Fix Memory Try It item string incorrect issue when load from OC Profile.
          G.Modify auto adjust CPU Base Clock related code when use XMP 3200MHz memory.
          H.Modify some DRAM timing auto setting.
          I.Fix system always reset on 0x04 issue when install four memory and set CPU Base Clock
            then change memory to other module.
          J.Fix DRAM Voltage incorrect issue when set DRAM Voltage item and occur OC fail.
        8.Update ISL6388_m205 module.
          1.Fix read CMOS function coding error.
        9.Update PV3203_m205 module.
          1.Fix read CMOS function coding error.
        10.Fix particular USB mouse will hang 0x9C issue.
        11.Add M.2 Source Link item and modify M.2 PCH Strap help string.
   12.Support int15 CPU PCIE & PCH PCIE switch function.
   13.Update MSIOC MsiOc_LituyaBay_m127 module.
      A.Support auto adjust M.2 Source Link related code when set CPU Base Clock item.
           B.Modify some DRAM timing auto setting.
           C.Fix current DRAM CH_A/B Voltage incorrect issue when DRAM CH_A/B Voltage item is auto and
             have adjust DRAM CH_C/D Voltage item.
   14.Fix Ghost speed too low.
   15.Fix CM Reaper USB mouse hang post 9C.        



This Bios use is done solely at your risk!

To flash:

>>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB 
     G.) Now follow the directions and let the tool flash
     H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_me10_mb.zip
Logged
MSI X299 Gaming M7 ACK (MS-7A90) Bios 1.A0
Core i7 7820X @ 4404.45 MHz (44 * 100.1 MHz, fixed all cores), 1.158v - delidded and using der8auer Skylake-X Direct Die Frame
Corsair H110 Liquid CPU Cooler
32GB (4 x 8GB) Corsair CMR32GX4M4Z3200C16 @ 1602.9 MHz (DDR4-3206), 16-18-18-36-2t, 1.35v
MSI GeForce RTX 2080 Ti DUKE 11G OC
1TB Crucial MX500 M.2 SSD + 2TB Crucial MX500 SSD
Thermaltake Toughpower Grand RGB 1200W Platinum • +12V: 100A • +3.3V: 25A • +5V: 25A
Windows 10 Pro
MSI MAG BUNKER Case
Pages: [1]   Go Up