Hey everyone, I purchased this laptop a little over a month ago and It was running pretty flawlessly until I updated to the latest bios. Then all of a sudden the fans kept going off and on, off and on. Both GPU and CPU were doing this. Then a few days later the fans would not run at all in bios or until Dragon Center had been loaded. A few days after that I had to press the cooler booster button in order for the fans to kick on at all.
Steps taken:
Updated to the latest EC
Uninstalled dragon center, reinstalled dragon center to latest version
reset bios via pin on bottom of laptop
Uninstalled dragon center and installed Silent option(works with kaby lake), and had some success in keeping the CPU fan on without pressing cooler booster but only after OS is loaded and software loads(fans don't run in bios or on boot)
reverted to old bios 307
Product info export:
------------------
System Information
------------------
Serial Number:
Product Name: GT62VR 7RE
OS: Microsoft Windows 10 Home 64-bit Ver.1703(OS build 15063.0.amd64fre.rs2_release.170317-1834)
Windows Product Key:
HDI Build: ZS7-16L2RM4-CS1 3.TC5.A40.29.0.1
BIOS Version: E16L2IMS.308
BIOS Release Date: 2017/04/19
EC Version: 16L2EMS1.1070221201715:51:28
CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
Memory: 16 GB @ 1200 MHz
- 8192 MB, DDR4-2400, SK Hynix HMA81GS6AFR8N-UH
- 8192 MB, DDR4-2400, SK Hynix HMA81GS6AFR8N-UH
Graphics: NVIDIA GeForce GTX 1070, 8192 MB
VBIOS Version: 86.04.31.00.0d,8388608
Drive: SSD, KINGSTON RBU-SNS8152S3256GG5, 238.47 GB
Drive: HDD, HGST HTS721010A9E630, 931.51 GB
Network: Killer E2500 Gigabit Ethernet Controller
Network: Bluetooth Device (Personal Area Network)
Network: Killer Wireless-n/a/ac 1435 Wireless Network Adapter
SHIFT mode: None
Power Plan: Power Scheme GUID: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c (High performance)
Currently I have SCM, dragon center, and killer networking suite uninstalled and just running Silent Option with an Advanced Fan profile. One more thing I should note is that if the computer goes into idle or shuts down from windows bluetooth stops working and there is a USB device that can't be recognized by windows. Each time I either have to reboot until it pops back up, or change legacy usb from off/auto/on to another setting for the bluetooth to show back up.
Has anyone had experience with this and has found a solution? Contacted tech support already and they suggested that I reset the bios, which I had done. Trying to avoid having to RMA in the long run and waiting to hear back from tech support again with some other options.