Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: 【MSI PRO MOD –S5: Scratch Build】 Arctic Scavenger by GOF JozhClassified  (Read 3211 times)

0 Members and 1 Guest are viewing this topic.

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

Cheers to all

JozhClassified from GOF mods Guangzhou

this is the 1st time I will be joining a contest outside China and I am very excited to play against modders all over the globe
good luck to all.

instagram: jozh.classified

almost done at 60% overall progress =)
https://www.facebook.com/photo.php?fbid=10211207782765131&set=a.10210340233916952.1073741831.1075210724&type=3&theater
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

Parts that I will using for this mod


Pacific W4 RGB CPU water block
https://www.facebook.com/photo.php?fbid=10211212262237115&set=a.10211212219956058.1073741836.1075210724&type=3&theater


Pacific PR15 pump + reservoir
https://www.facebook.com/photo.php?fbid=10211212264317167&set=a.10211212219956058.1073741836.1075210724&type=3&theater


V-Tuber 3T
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150


Pacific RL480
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150


Pacific compression soft and hard tube fittings
pacific 90 degree extenders
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150



MSI Mortar b250m mother board
https://www.facebook.com/photo.php?fbid=10211212231316342&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212244676676&set=a.10211212219956058.1073741836.1075210724&type=3&theater


Team Group T-Force Dark 8GBx4 memory kits
https://www.facebook.com/photo.php?fbid=10211212242836630&set=a.10211212219956058.1073741836.1075210724&type=3&theater


MSI GTX1050 red dragon gaming X
https://www.facebook.com/photo.php?fbid=10211212240276566&set=a.10211212219956058.1073741836.1075210724&type=3&theater


Thermaltake SE530W Sleeved red
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150


Thermatake Riing white LED 12cm
https://www.facebook.com/photo.php?fbid=10211212238316517&set=a.10211212219956058.1073741836.1075210724&type=3&theater

CPU will be upload soon since CPU is a scattered piece =)
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

this reply this is where I started to make the case hope you like it guys



cutting the needed parts stainless steel so that I can weld them together
https://www.facebook.com/photo.php?fbid=10211212341879106&set=a.10211212219956058.1073741836.1075210724&type=3&theater


practicing welding since its my 1st time after my dad thought me several years ago
https://www.facebook.com/photo.php?fbid=10211212310478321&set=a.10211212219956058.1073741836.1075210724&type=3&theater


finished welding the main frame of the case =) now time to get the clearance for the rads and the PSU since they will be one who will 
be fitted to the case with perfect to 0 clearance
https://www.facebook.com/photo.php?fbid=10211212310558323&set=a.10211212219956058.1073741836.1075210724&type=3&theater


case almost done =)
https://www.facebook.com/photo.php?fbid=10211212328638775&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212337639000&set=a.10211212219956058.1073741836.1075210724&type=3&theater

 
final blow to the case for welding
https://www.facebook.com/photo.php?fbid=10211212328678776&set=a.10211212219956058.1073741836.1075210724&type=3&theater


testing the load outs =) like PSU and such
https://www.facebook.com/photo.php?fbid=10211212317798504&set=a.10211212219956058.1073741836.1075210724&type=3&theater


cleaning it up
https://www.facebook.com/photo.php?fbid=10211212255396944&set=a.10211212219956058.1073741836.1075210724&type=3&theater


final picture of the case
https://www.facebook.com/photo.php?fbid=10211212252436870&set=a.10211212219956058.1073741836.1075210724&type=3&theater

sorry for the links I am really having trouble uploading pictures since I am located at china =)
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

at this stage I will be laying down the Acrylic works, Hinges, Preparation of case for painting
more to be updated on the following days =)

https://www.facebook.com/photo.php?fbid=10211212273477396&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212254876931&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212308638275&set=a.10211212219956058.1073741836.1075210724&type=3&theater
at this point I am trying to decide the orientation of the the board and other hardware to be fitting on the case

https://www.facebook.com/photo.php?fbid=10211212250076811&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212248116762&set=a.10211212219956058.1073741836.1075210724&type=3&theater
now I added some snap hinges for me to be able to work under the mother board tray for the wire management and loop

https://www.facebook.com/photo.php?fbid=10211212308598274&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150
now I added the custom front panel switch hub + thermaltake Commander FT fan hub LED display

https://www.facebook.com/photo.php?fbid=10211212354039410&set=a.10211212219956058.1073741836.1075210724&type=3&theater
I added some sliding hinge for his upper flares

https://www.facebook.com/photo.php?fbid=10211212356799479&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/jozhiteens/media_set?set=a.10211212219956058.1073741836.1075210724&type=3&uploaded=150
sanding the case coz I am lazy that day =P and also added the top hinge its a moving part again

https://www.facebook.com/photo.php?fbid=10211212446601724&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212453201889&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212458442020&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212458242015&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212398400519&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212470522322&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212402640625&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212419881056&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212494442920&set=a.10211212219956058.1073741836.1075210724&type=3&theater
some of the 1st Acrylic work is being done plus some test fit of the board and PGU orientation =) copper tubes anyone?

https://www.facebook.com/photo.php?fbid=10211212441121587&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212419601049&set=a.10211212219956058.1073741836.1075210724&type=3&theater
https://www.facebook.com/photo.php?fbid=10211212441401594&set=a.10211212219956058.1073741836.1075210724&type=3&theater
since my laser is busted now I am up to finish this mod manual cuts using band saw more pictures will be uploaded soon =)
since the GOF photographer is the one who is taking pictures of me using her camera

edited*
https://www.facebook.com/photo.php?fbid=10211130548594325&set=a.1458363133806.2059000.1075210724&type=3&theater

when I am cutting Acrylic 

https://www.facebook.com/photo.php?fbid=10211168332298894&set=a.10205068621169928.1073741825.1075210724&type=3&theater

https://www.facebook.com/jozhiteens/media_set?set=a.10205068621169928.1073741825.1075210724&type=3

fog light effect 

https://www.facebook.com/photo.php?fbid=10211194776479982&set=a.10210340233916952.1073741831.1075210724&type=3&theater

so that I did here is I detailed the scales of the mod =)

https://www.facebook.com/photo.php?fbid=10211147544979224&set=a.10210340233916952.1073741831.1075210724&type=3&theater

also some front panel detailing look nice =)

https://www.facebook.com/photo.php?fbid=10211188466722242&set=a.10210340233916952.1073741831.1075210724&type=3&theater

this is how the case look like after painting it hehehehe and I use a trolley coz it was to heavy for me and I was alone at the shop going inside and outside the baking room is a bit T____T
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

this reply finishing touches like loop and others will be posted here

https://www.facebook.com/photo.php?fbid=10211207782765131&set=a.10210340233916952.1073741831.1075210724&type=3&theater
this is how she looks now =P
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

the inspiration behind the build

this was inspired as a surveyor mech / cyborg in the Arctics, hence planet earth is already suffering from climate change people, establishments, non government units and government unit establish a machine with an en-depth learning of the drastic changes in the arctic caps, this mech / cyborg is fully equip with a computing brain that surveys the arctic surface and can dig up to 10feet below the ground and hinge itself to ice walls with its scales and other body amour. In addition it is fully equipped with thunder fog lights for lighting for some live feeds during the survey. 

the cooling and heating system is very complex in this mech / cyborg where it is using 480 radiation that thermaltake provides, the red fluid that is being used in this project is to indicate that he is heating up for the temperature in the arctic caps are very severe and machines needs to be head up to avoid freezing. The machine was design to go home on July 10, 2017 for a system maintenance and data retrieval, and the maintenance was set for the GOF team who are high training technicians in terms of checking high computing computers and data retrieval. 

Project: Arctic Scavenger by JozhClassified of GOF mods Guangzhou  

  
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

there photos are taken from my phone =) Final touches will be GPU installation, front switch and fixing of all armour
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

dash form and rest form I am currently editing my final photos with our team Photographer

this is also my power hub :) and also some additional to build

uploading the final pictures soon
Logged

MSI-MKT

  • MSI Tech
  • *****
  • Offline Offline
  • Posts: 188
  • MSI Marketing

Hi,
 
MSI PRO MOD S5 will end on 10th July (Next Monday), please SPEED UP your process of mod build.
 
If you have finished the mod, please MUST reply the following message under the campaign thread (https://forum-en.msi.com/index.php?topic=284238.0) by July 10, 2017 11:59 PM (GMT +8).
MOD entry title
URL of your worklog
 
In addition, the following evaluation criteria are used for judging at the MSI PRO MOD S5:
Creativity: 35%
Overall Design: 30%
Technique: 25%
Worklog: 10%
 
So, you may take your time to upload more photos with detail description to enrich your worklog to get a high score on "Worklog" criterion.
 

Thanks~
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

now its the time for the final photos =)

banner + the close-up shoots for the MSI products that was used for this build
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

the full body shoot of Arctic Scavenger

it includes Dash mode (at this reply thread)

final photos will be divided into post =)

once again thank you!!!
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

final photos for Rest form, loader, amour and water distributor
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

3rd batch will be power loader, main engine, and tubes

also me beside it ahahahahaha
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

the CPU for this build was i5 7600k did not have the chance to take a picture 
since it was a scattered piece from the shop and was given by my boss 

full specs are as follow

BOARD: MSI b250 Mortar Arsenal Gaming
GPU: MSI GTX1050ti Gaming X red dragon
CPU: intel i5 7600k
PSU: Thermaltake 530se
Memory: Team Group 32GB ddr4 2400mhz

Cooling system
Thermaltake Pacific RL480
Thermaltake Pacific PR15 DDC pump
Thermaltake Riing fans 12cm white
Primochill FlexSX mate black
Primochull FlexSX skywhite
Primochill Pass thru
Primochill Flex Tubing

accessories / modding
Intel wifi receiver (antenna for Arctic Scavenger)
Stainless steel (Frame of Arctic Scavenger)
Snap Hinges (loader for Arctic Scavenger)
Sliding Hinges (upper Flare Armour for Arctic Scavenger)
Acrylic works (armour, board tray and wall for Arctic Scavenger)
Thermaltake Commander FT LED display (status indicator of Arctic Scavenger)
Lift Hinges (moving balance beam of Arctic Scavenger)
Front Switch (Acrylic cut and was design as power hub for Arctic Scavenger)
sleeves cables (for 24, 8, 6, and pins for Arctic Scavenger)

thanks for all God speed all modders
Logged

jozheusebio30Topic starter

  • CORPORAL
  • ****
  • Offline Offline
  • Posts: 19

my favorite pictures of the build
Logged
Pages: [1]   Go Up