Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration  (Read 1950 times)

0 Members and 1 Guest are viewing this topic.

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8

MSI PRO MOD - Scratch Build

ARCTPloration





Hi, My name is Roy,I am from Indonesia . 

my fb page :
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #1 on: 10-July-17, 02:45:30 »

For Spesification my computer modification are :

Motherboard: MSI H110Pro ITX
Graphics Card: MSI GTX 275 Twin Frozr

POWER SUPPLY: Bitfenix Whisper 650Watt
Ram: 8 gb Team  T Force Dark Red (2 x 4gb)
Fans: Cube Gaming Ring White LED
LED: Cube Gaming Red
CPU: Intel i5 6500
SSD: Galax gamer SSD 128 gb
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #2 on: 10-July-17, 03:06:16 »

the concept that i want to make is build a vehicle case that used in arctic exploration
my preferenceses should like this picture  :



i chose the tractor vehicle that drag a cart behind for my mod model
 this is my first mod of PC case :)
thanks
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #3 on: 10-July-17, 03:17:23 »

this is my worklog

basicly my scracth build is from wood. i use hard wood combile with MDL with 3mm and 9 mm thickness
i cut the wood from the pattern i create before
drill and nail it together
in some part i use screw to join them together
some part also need to be glue
after glue i clamp it together so that glue can stick strong
firstly i make the base for VGA , and mother board
i plan to take the PSU outside the tractor
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #4 on: 10-July-17, 04:05:49 »

for the outer shell i use thinner wood 3mm
i cut it using scroll saw
i print the pattern before and take it to the surface of the wood then i cut it using the scroll saw
to put it together i use nail and glue
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #5 on: 10-July-17, 05:05:00 »

AFter that is time for painting, finishing, and detailing. 
we use duplex, san polac, after that sanding and paint them
i dont have airbrush so i just go with pylox / spray can 
mostly i paint in white because it meet the "Arctic theme" in my opinion

i using acrylic too
i bend acryic use dremel versatip 
Logged

grosirsepatuwanita212Topic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 8
Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
« Reply #6 on: 10-July-17, 09:27:26 »

final result of the case mod
i hope you enjoy :)
Logged
Pages: [1]   Go Up