Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: AE2420 3D where to reset CMOS BIOS?  (Read 187 times)

0 Members and 1 Guest are viewing this topic.

julia_johnsonjjTopic starter

  • PRIVATE E-2
  • **
  • Offline Offline
  • Posts: 2
AE2420 3D where to reset CMOS BIOS?
« on: 19-December-18, 14:35:18 »

Hi, for some reason I became confused and installed the BIOS for the AE2420 not the AE2420 3D. MSI software did not warn me, like Asus software does for their BIOS.
Anyway, I can't get to any screen whatsoever, and I cannot find the CMOS battery pin.

Anyone have the schematic for the motherboard or info on how to reset the CMOS?

I have the back cover off, do I have to remove the entire board and flip it over to see the pin connector? On the side that I can see there is a BATT pin and I moved those terminals, but CMOS was not erased....
Logged

Mog

  • AIO Moderator
  • *****
  • Offline Offline
  • Posts: 30
Re: AE2420 3D where to reset CMOS BIOS?
« Reply #1 on: 07-January-19, 21:55:07 »

Hi Julia,

AE2420 or AE2420 3D All-In-One PC has been discontinued, please check JBAT1 pin header on motherboard if you remove back cover and bracket. Try to move JBAT1 jumper from 1-2 to 2-3 position approximately 15 seconds then move it back for Clear CMOS.
Logged
Pages: [1]   Go Up