Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: MSI P67A C43 B3  (Read 147 times)

0 Members and 1 Guest are viewing this topic.

tdygpxvfbTopic starter

  • **
  • Offline Offline
  • Posts: 1
MSI P67A C43 B3
« on: 11-February-19, 11:58:18 »


Today I enabled the OC Genie mode in the BIOS, saved it and quit. After that, the system does not start: 4 blue LEDs near the CPU socket light up and all the coolers are spinning and after 5 seconds everything turns off, it turns on again and the same thing happens and so on forever - boot loop. I tried to reset the bios: 1) disconnected all the wires from the PSU from the MB and removed the battery for 30 min. 2) Turn off the PSU to 0 and without disconnecting the wires from the PSU and MB, move the jumper J BAT to 2/3 and then back to 1/2. 3) When the system is off - pressing / hitting the Clear CMOS Button. 

The BIOS did not reset. The manual says: "Updating BIOS or clearing CMOS is not allowed in OC Genie mode". How to be?


  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Offline Offline
  • Posts: 73043
Re: MSI P67A C43 B3
« Reply #1 on: 12-February-19, 14:33:50 »

try boot several times
the bios can automatically reset after few unsuccessful boots
Pages: [1]   Go Up