Topic: 2080ti Lightning Z clocks stuck @ 1350mhz under a waterblock (Read 2361 times)

mrkingx11 · « **on:** 20-March-19, 02:47:17 »

hello

i have installed Bitspower waterblock on 2080 ti Lightning Z and i noticed MSI AB wouldn't allow power target control and pretty any control over the card then i noticed the clocks were locked to 1350mhz , when i try to apply an OC values the screen goes black for 10 seconds and comes back on without any changes !!!!

i was told to plug the original fans to the fan headers which is almost impossible since i have a hard line tubes setup

i tried to register my card but i get the " strange " product not recognized error in the website and the android app !!!

someone help please

flobelix · « **Reply #1 on:** 20-March-19, 10:34:35 »

see:

Quote from: flobelix on 15-March-19, 15:41:18

Ok, issue got confirmed by MSI. They found the following workaround so far, please test it.

1. Connect FAN to the pin header

2. Install the RTX 2080 Ti Lightning Z in the system

3. Re-install NV driver (the version used by MSI is 419.35)

4. Power off the system

5. Take the RTX 2080 Ti Lightning Z out of the system and disconnect FAN

6. Install the RTX 2080 Ti Lightning Z in the system

7. Power on the system and do not re-install NV driver

mrkingx11 · « **Reply #2 on:** 20-March-19, 12:48:11 »

really man ?

what if a new game-ready driver comes out ?! this is sounding more and more like a mistake

flobelix · « **Reply #3 on:** 20-March-19, 12:52:09 »

It should be fixed but so far there is just the workaround. If you want to contact MSI about it: >>How to contact MSI.<<

cassfjxau · « **Reply #4 on:** 18-May-19, 19:24:05 »

Hi mate, have u resolved it? I just have the same issue and tried the method mentioned above -not working:(

flobelix · « **Reply #5 on:** 18-May-19, 19:27:37 »

Quote from: flobelix on 22-March-19, 17:59:17

Dear all,

MSI provided a modified beta vbios for testing. It will disable any RGB working though. If you want to still try it send me a personal message and I will provide a link via personal message.

cassfjxau · « **Reply #6 on:** 18-May-19, 22:47:01 »

Hi mate, could you please send me the link, much appreciate? Ive pm u but not sure if you read it:)

cassfjxau · « **Reply #7 on:** 20-May-19, 03:12:58 »

the vbios has been tested and it did work, thank you flobelix

just wondering why MSI doesn't allow for a higher power limit for the lightning, 380w is just a waste for this kind of card as EVGA gives its flagship 2080ti Kingpin a maximum 520w power limit, just asking

flobelix · « **Reply #8 on:** 20-May-19, 11:47:45 »

qxw27295655 · « **Reply #9 on:** 15-July-19, 21:31:31 »

Quote from: flobelix on 20-March-19, 17:34:35

see:
hello，I want the toy you said. about RGB。 I want to ask another bios about overclocking. thank you

27295655 · « **Reply #10 on:** 15-July-19, 21:43:16 »

Quote from: flobelix on 20-March-19, 17:34:35

看到：
嗨，我想要你说的关于RGB的bios。顺便问一下，有没有可以超频的bios？非常感谢你，期待你的回复。

27295655 · « **Reply #11 on:** 15-July-19, 21:46:50 »

Quote from: flobelix on 20-May-19, 18:47:45

:hat tip:Hey, I want what you said about RGB bios. By the way, is there any bios that can be overclocked? Thank you very much, look forward to your reply.

flobelix · « **Reply #12 on:** 16-July-19, 12:00:07 »

Quote from: 27295655 on 16-July-19, 04:46:50

:hat tip:Hey, I want what you said about RGB bios. By the way, is there any bios that can be overclocked? Thank you very much, look forward to your reply.

It is a Lightning card. All vbios versions allow overclocking. I don't understand what you are saying about RGB

adamdrums · « **Reply #13 on:** 25-August-19, 16:43:49 »

Hi guy's, I've just finished my first ever custom loop. I've put weeks, ££££££ and my heart and soul into it. Turned out better than I could have hoped for. Low 40's in a 26c room!!Then I updated the driver :-( I'm absolutely in pieces over this. Literally can't sleep!! Can someone PLEASE reassure me that there actually is a working vbios for this issue?? Putting the fans back on is out of the question. Still waiting for response from MSI. Many, many thanks for any help or reassurance anybody can give me. Cheers Adam.

flobelix · « **Reply #14 on:** 26-August-19, 14:28:07 »

Well, yes. Many have posted about it already. You can request it via pm.

zanedrums · « **Reply #15 on:** 28-August-19, 18:32:13 »

Flobelix, could you send me the Vbios link also?

Card ran 1980mhz in new computer but kept crashing in 15 minutes. Called MSI and they told me to try changing the GPU in another computer and then updating drivers. Since i did this and installed a new driver it froze at 1350mhz.. but fixed the crashing.

flobelix · « **Reply #16 on:** 01-September-19, 12:07:19 »

Yes, when you send me a pm with the S/N

der_uwe · « **Reply #17 on:** 22-September-19, 17:02:51 »

Flobelix, can you also send me the Vbios link? Can not send you a PM.

[/pre]

pdlr3 · « **Reply #18 on:** 23-September-19, 10:39:39 »

Hi, guys.
I just bought a Lightining Z and I am waiting for the bitspower water block.
Where can I download that bios so I don't have the same problem?
Thanks a lot
Best regards.

flobelix · « **Reply #19 on:** 23-September-19, 14:26:52 »

Quote from: der_uwe on 23-September-19, 00:02:51

Flobelix, can you also send me the Vbios link? Can not send you a PM.

Check pm

Quote from: pdlr3 on 23-September-19, 17:39:39

Where can I download that bios so I don't have the same problem?
Thanks a lot
Best regards.

Quote from: flobelix on 22-March-19, 17:59:17

Dear all,

MSI provided a modified beta vbios for testing. It will disable any RGB working though. If you want to still try it send me a personal message and I will provide a link via personal message.

david.grant81 · « **Reply #20 on:** 08-October-19, 10:04:05 »

Hello Flobelix,
You can send me the bios standard and the bios ln2 mod with no fan for my Lightning ?

flobelix · « **Reply #21 on:** 08-October-19, 11:34:35 »

Card's S/N is required.

flobelix · « **Reply #22 on:** 08-October-19, 13:39:43 »

Check pm

rbrettschneider88 · « **Reply #23 on:** 22-October-19, 01:24:17 »

Dear Flobelix,

is the custom bios confirmed tob e working with watercooled 2080ti lighting Z cards?

May I please ask for the modded bios as well? I am also stuck at 1350 mhz with waterblock.

Please pm me.

Thank you.

flobelix · « **Reply #24 on:** 22-October-19, 02:48:04 »

Well, it is meant for nothing else so yes.

Card's S/N is required.

mfj7777 · « **Reply #25 on:** 08-November-19, 10:06:30 »

Please help. My S/N is 602-V377-05SB1905000729. Please also inform once have permanent fix without glitches. Thank you sir

flobelix · « **Reply #26 on:** 08-November-19, 10:48:49 »

Check pm

Register Now!

News:

Author Topic: 2080ti Lightning Z clocks stuck @ 1350mhz under a waterblock (Read 2361 times)