Hello,
Ok, so your mobo is a B450M BAZOOKA PLUS..
First, update bios to V1.40 (more recent version who includes "
improved memory compatibility", do not update to V1.60 because this bios is buggy for current CPUs), update bios using M-Flash. Do
exactly that:
- Download >>Bios V1.40<<.
- Take an USB pen having no more than 16GB (physical size) with only one partition.
Verify it with CHKDSK.
- Unzip it and copy the file "E7B90A
MS.140" on the root of the USB pen.
- Boot and enter in Bios Setup. Press [F6], confirm, press [F10] and confirm. Pc should restart.
- Enter again in Bios Setup.
- Plug the USB pen into one port on the back panel (better to use a 2.0).
- Click on M-Flash then select the file on the USB pen.
- M-Flash should start; be cautious to not abort it before the end (can last up to 5mn).
- Power off PSU, unplug the power cord and wait that all mobo's leds light off.- Power on and enter in bios setup then
set "SETTINGS \ Advanced \ Windows OS Configuration \ Windows 10 WHQL Support" at "Enabled" or "UEFI",
change nothing else for the moment.
After that, start Windows and install
>>AMD Chipset Driver (2019-03-20)<<. Reboot then verify that Windows works fine. If yes, activate XMP. Result with this bios version?
Have a good day,
