Please login or register.
Pages: [1] 2  All   Go Down

Author Topic: no sound after overclock  (Read 1450 times)

0 Members and 1 Guest are viewing this topic.

Lineage

  • Guest
no sound after overclock
« on: 27-October-03, 15:48:36 »

system:
p4 2.4c
865pe neo2-ls
Kingmax ddr400 2x 256 dual channel ram ratio 1:1
Sapphire ati radeaon 9000 pro 128mb
350w power supply
westem digital 40gb hdd
winxp pro (no sp1)


when i overclock my fsb to 250, it dont boot, then i increase the ram voltage to 2.7v and ratio 5:4 (timing 2.5, 3, 3, 8.. not sure, have to go home check) and disable the overclocking mode, it can boot but the onboard sound doesn't work. Please help
another thing.... why my nb temp in corecenter always around 59-60 degree c? it very high compare to 36degree cpu temp and 38 system temp, is there somethings wrong?
Logged

Maesus

  • GENERAL OF THE ARMY
  • *****
  • Offline Offline
  • Posts: 10518
  • in Penang, Malaysia
« Reply #1 on: 27-October-03, 18:26:55 »
  • Best Answer

  • your RAM can't take 250MHZ FSB 1:1. 5:4 is more practical setup. You must have forgotten to lock your AGP/PCI to 66/33 that's why you're losing sound.
    Logged
    Please read the ==>MOAN Guide<==
    Maesus

    My PC:
    Now using : IBM Thinkpad T60p

    Core 2 Duo recipe
    E6600 2.66Ghz with GB Rocket Cooler Pro : MSI 975X Platinum PUE BIOS 7.6 : DDR2-667 2x1GB + DDR2-800 2x1GB : MSI 8800 Ultra : 80GB WD Caviar SE : Maxtor 250GB SATA : LiteOn LH-20A1S DVD writer + Samsung SH-W162C DVD writer : MSI Theater 550 Pro : LOGITECH Z-680 : DELL E228WFP 22" LCD : PowerLogic 500W PSU with +12V1&+12V2 @ 32A total

    REILLY875

    • MAJOR GENERAL
    • ***
    • Offline Offline
    • Posts: 3584
      • http://www.MSI.com.tw
    « Reply #2 on: 27-October-03, 21:20:42 »
  • Best Answer

  • Maesus is AGAIN 100% CORRECT, As to your question about the temp on the N-B, There are a lot of POSTS on this matter (DO A SEARCH) It has been VERIFIED THAT THERE IS NO TEMP. SENSOR ON THE i875 MO-BO (NO MATTER THE FLAVOR!) SO DO NOT MIND (DISREGARD) THE TEMP READING YOU ARE GETTING AS IT IS WRONG!! I myself did a temp. check with a infered temp gun, and the temps. where 110F UNDER LOAD( WITH FAN 100%) AND 90-94F AT IDEL. AMBIENT (room) TEMP 72F :-D)..Sean REILLY875
    Logged
    PRIMARY SYSTEM

    ALIENWARE- AREA-51-ALX
     EVGA-680i (ALIENWARE-REV.-D)
     INTEL ENTREME-9650-45NM QUAD CORE (12MB L2) 3.0GHZ @4.0GH
        (Requires The "P32" BIOS In Order To Run ANY PENRYN CPU)
     OEM THEMOCOOL-PANAFLOW HIGH PERFORMANCE LIQUID COOLING
     2 X 1GB PATRIOT LL6400                    
     2 X EVGA 8800(BLACK-PEARL) LIQUID COOLED-ULTRAS 650MHZ/1100MHZ MEM.
     1 X AGEIA PCI-X 100 PHYS-X 128MB CARD
     2 X WD 160GB RAPTORS IN RAID-0
     2 X WD 1 TB 7200-RPM IN RAID-1
      CREATIVE X-FI-HENDRIXS
     1 LG 4 X WRITE BLU-RAY (Reads HDVD)
     1 LG DVD BURNER W/LITESCRIBE
     1 PCPAC 1KW POWESUPPLY
      "CRAPPY" WINDOWS VISTA> "VISTAKE"!!!!
      3DMARK-2006=18,640

    Lineage

    • Guest
    « Reply #3 on: 28-October-03, 05:07:40 »

    so.. i should set DRAM FREQUENCY = 333 or 400 to get 66/33?
    if there is not nb senor, why they display it?/ weird...
    Logged

    REILLY875

    • MAJOR GENERAL
    • ***
    • Offline Offline
    • Posts: 3584
      • http://www.MSI.com.tw
    « Reply #4 on: 28-October-03, 05:28:31 »
  • Best Answer

  • YES SET YOUR MEM. TO 333. And on the same page(FREQ+VOLTAGE), Set your AGP/PCI BUS SPEED TO AS CLOSE TO 66/33 as you can!! :-D)..Sean REILLY875
    Logged
    PRIMARY SYSTEM

    ALIENWARE- AREA-51-ALX
     EVGA-680i (ALIENWARE-REV.-D)
     INTEL ENTREME-9650-45NM QUAD CORE (12MB L2) 3.0GHZ @4.0GH
        (Requires The "P32" BIOS In Order To Run ANY PENRYN CPU)
     OEM THEMOCOOL-PANAFLOW HIGH PERFORMANCE LIQUID COOLING
     2 X 1GB PATRIOT LL6400                    
     2 X EVGA 8800(BLACK-PEARL) LIQUID COOLED-ULTRAS 650MHZ/1100MHZ MEM.
     1 X AGEIA PCI-X 100 PHYS-X 128MB CARD
     2 X WD 160GB RAPTORS IN RAID-0
     2 X WD 1 TB 7200-RPM IN RAID-1
      CREATIVE X-FI-HENDRIXS
     1 LG 4 X WRITE BLU-RAY (Reads HDVD)
     1 LG DVD BURNER W/LITESCRIBE
     1 PCPAC 1KW POWESUPPLY
      "CRAPPY" WINDOWS VISTA> "VISTAKE"!!!!
      3DMARK-2006=18,640

    thomas66

    • Guest
    « Reply #5 on: 28-October-03, 15:20:19 »

    hello to read the follwoing post might give you a good help.

    http://www.msi.com.tw/program/service/forum/index.php?postid=180730&sid=#post180730
    Logged

    Lineage

    • Guest
    « Reply #6 on: 28-October-03, 18:09:19 »

    i m using bios 1.3 and it seems there is no option for me to lock the agp/pci... so does that mean i have to update to 1.7?
    i dont want to update coz it may fried the bio.....
    and about the ram frequency.... i using ddr400 ram, if set it to 333, whould it slower the ram?
    « Last Edit: 29-October-03, 04:29:18 by Lineage »
    Logged
    Pages: [1] 2  All   Go Up