Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Advanced search    

News:

Pages: [1]   Go Down

Author Topic: Connect Pcie Power Cable after moding bios  (Read 142 times)

0 Members and 1 Guest are viewing this topic.

seven_oclock_tengTopic starter

  • PRIVATE E-2
  • **
  • Offline Offline
  • Posts: 2
Connect Pcie Power Cable after moding bios
« on: 21-July-19, 00:14:36 »

hi everyone!

my graphic card gtx 1060 armor 6gb ocv1
S/N : 602-V328-070B1611004381

I did a mod bios and forgot to backup the bios. when the pc turn on it show "PLEASE POWER DOWN AND CONNECT PCIe POWER CABLE(S) FOR THIS GRAPHICS CARD. I did connect 8pin pcie both gpu and psu.

this problem occurred when failed flashing. I tried to flash again nvflash showed a "power alert asserted" error. Im tried flashing with other bios https://forum-en.msi.com/index.php?topic=303530.msg1759339#msg1759339 with command nvflash64 -6 --nopowerchk gp106.rom but the problem still exist.
Logged

flobelix

  • MSIHQ Red Rockets Team Member
  • Global Moderator
  • *****
  • Offline Offline
  • Posts: 33942
  • 微星科技
    • Afterburner New Features Introduction | MSI
Re: Connect Pcie Power Cable after moding bios
« Reply #1 on: 21-July-19, 04:37:40 »

The vbios you tried is completely wrong. The latest original vbios is NV328MH.150. If that doesn't help you killed the card with your mod.

For flashing use nvflash: https://www.techpowerup.com/downloads/2850/nvflash-5-328-0-for-windows

note that you need to rename the unpacked file NV328MH.150 to .rom (e.g. 150.rom) for flashing.

If you saved the nvflash for windows .exe say under drive d: you can start it in a Windows prompt in administrator mode after you saved the .rom at the same place. First type d: (or wherever you saved nvflash and the .rom) and press enter. Now you changed to drive d: where you have nvflash in the root directory. Now start the flash with the following line: nvflash -6 150.rom (press enter)

Note that if using a 64bit OS you'll need to run the line nvflash64 -6 150.rom
Logged
MSI X299 Gaming M7 ACK (MS-7A90) Bios 1.A0
Core i7 7820X @ 4404.45 MHz (44 * 100.1 MHz, fixed all cores), 1.158v - delidded and using der8auer Skylake-X Direct Die Frame
Corsair H110 Liquid CPU Cooler
32GB (4 x 8GB) Corsair CMR32GX4M4Z3200C16 @ 1602.9 MHz (DDR4-3206), 16-18-18-36-2t, 1.35v
MSI GeForce RTX 2080 Ti DUKE 11G OC
1TB Crucial MX500 M.2 SSD + 2TB Crucial MX500 SSD
Thermaltake Toughpower Grand RGB 1200W Platinum • +12V: 100A • +3.3V: 25A • +5V: 25A
Windows 10 Pro
MSI MAG BUNKER Case

seven_oclock_tengTopic starter

  • PRIVATE E-2
  • **
  • Offline Offline
  • Posts: 2
Re: Connect Pcie Power Cable after moding bios
« Reply #2 on: 21-July-19, 07:17:15 »

Thank for your help! 
My graphics card work perfectly 

Have a nice day!
Logged

flobelix

  • MSIHQ Red Rockets Team Member
  • Global Moderator
  • *****
  • Offline Offline
  • Posts: 33942
  • 微星科技
    • Afterburner New Features Introduction | MSI
Re: Connect Pcie Power Cable after moding bios
« Reply #3 on: 21-July-19, 08:05:08 »

:hat tip:
Logged
MSI X299 Gaming M7 ACK (MS-7A90) Bios 1.A0
Core i7 7820X @ 4404.45 MHz (44 * 100.1 MHz, fixed all cores), 1.158v - delidded and using der8auer Skylake-X Direct Die Frame
Corsair H110 Liquid CPU Cooler
32GB (4 x 8GB) Corsair CMR32GX4M4Z3200C16 @ 1602.9 MHz (DDR4-3206), 16-18-18-36-2t, 1.35v
MSI GeForce RTX 2080 Ti DUKE 11G OC
1TB Crucial MX500 M.2 SSD + 2TB Crucial MX500 SSD
Thermaltake Toughpower Grand RGB 1200W Platinum • +12V: 100A • +3.3V: 25A • +5V: 25A
Windows 10 Pro
MSI MAG BUNKER Case
Pages: [1]   Go Up