Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!  (Read 8701 times)

0 Members and 1 Guest are viewing this topic.

Ex Forum User 3Topic starter

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 23397

Hi there,

I got these 64 bit Windows utils from MSI.
They have been tested to work with a 925X board as far as I know.

REMEMBER, THESE ARE NOT SUPPORTED BY MSI!

IF ANYTHING GOES WRONG, YOU ARE THE ONLY ONE TO BLAME.

Do not contact MSI about these, nor ask support.
You can alway's try to get support here in the forum, but we know just as much as you do.

[ IMAGE NOT SHOWN - GUESTS CANNOT VIEW ATTACHED IMAGES ]
Logged

Mick W

  • STAFF SERGEANT
  • *
  • Offline Offline
  • Posts: 81
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #1 on: 25-August-05, 18:53:24 »

Have core center  installed on my K8T Neo2 can set fans and fsb but just like windows xp 32 does with the 32 bit version  it reads my temps wrong. I am getting more and more sure this is an issue with the sensors on the board.
Logged
K8T Neo2
3200+ Winchester
4-256 Hyperx in dual channel
ATI X800XL
1-250gig sata Hitachi 1-80gig WD 1-40gig Maxtor
Sony DVD RW DW-Q28A
Nspire NSP-450P4DL

KNI

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #2 on: 21-December-05, 10:02:05 »

For me Core Center says...

"Core Center doesn't support your motherboard"

and PC Alert..

"No hardware monitor!"

IE: NoGo with K8N-Master2
Logged

Verdigo

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #3 on: 25-December-05, 11:49:22 »

When I try to start CoreCenter64, I get pop ups that say:
 
"Failed to load OverClocking Driver!"

In Event Viewer it says:

Quote
"Application popup:  : \??\C:\WINDOWS\nvoclock.sys failed to load"

"\??\C:\WINDOWS\nvoclock.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver."

"The NVR0Dev service failed to start due to the following error:
This driver has been blocked from loading "


Then it just closes. Since NV is in the driver name I assume its from nVidia. Anyone have a link to an updated version? Or did I just install stuff in the wrong order? My motherboard is an MSI K8N Neo4 (MS-7125). I installed the 32-bit versions before I realized they weren't compatable. I uninstalled them before I installed the CoreCenter from this page. My major question is why does MSI ship 32-bit drivers for everything on a 64-bit motherboard :huh:
Logged

Stu

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 19551
  • Birmingham, UK
    • StuOnline.co.uk
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #4 on: 25-December-05, 13:05:18 »

Quote
My major question is why does MSI ship 32-bit drivers for everything on a 64-bit motherboard

because most people still use 32bit Windows XP, as x64 edition is still a little pointless...

Logged
Former moderator and admin, 2004-2012

gjarreau

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #5 on: 28-December-05, 15:09:55 »

because most people still use 32bit Windows XP, as x64 edition is still a little pointless...



 Why is xp x64 pointless? Because a lot of software doesn't run?
 Can you provide links to the 64bit msi drivers for the k8n neo4 f motherboard?
 I may have installed the wrong ones from the site, because some software will not install (firefox, avg 32bit, ect...). A guy here at work has a 64bit pc and xp x64, and firefox installed for him... Is there driver stability isssues, or what do you think is going on here?
Logged

Stu

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 19551
  • Birmingham, UK
    • StuOnline.co.uk
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #6 on: 28-December-05, 15:34:22 »

gjarreau, please start your own topic in the relevant forum as this forum isn't really for tech support

AVG 32bit won't work in x64 anyway, find x64 nvidia drivers at www.nvidia.com

Logged
Former moderator and admin, 2004-2012

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #7 on: 21-February-06, 15:10:24 »

I can not seem to get either of them to load up and work with my diamond plus mb
Logged

Ex Forum User 3Topic starter

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 23397
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #8 on: 22-February-06, 06:09:11 »

Hi Guy's,

Here are the latest versions I could find.

[ IMAGE NOT SHOWN - GUESTS CANNOT VIEW ATTACHED IMAGES ]
Logged

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #9 on: 22-February-06, 12:32:04 »

thanks, both of those show 32 bit set up launchers.

niether of them seem to work. :S
Logged

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #10 on: 22-February-06, 12:42:39 »

tagg
Logged

kippie

  • MSIHQ Red Rockets Team Member
  • SECOND LIEUTENANT
  • **
  • Offline Offline
  • Posts: 171
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #11 on: 03-March-06, 05:41:18 »

Have corecenter64 installed on my MSI notebook MS-1029 ( aka M635 ).

Doesn't work! Had to reinstall winxp x64 with preservation of all the settings.

Conclusion: Still too few real x64 drivers available at this moment.
I'll keep waiting...

specs:
MSI Megabook MS-1029 barebone
VGA ATI Mobility Radeon X700
LAN (RJ45) Realtek RTL8139
AMD Turion MT40 2.2Ghz
RAM OCZ4001024VSO 1x 1GB PC3200
HD Seagate ST9120821A
WLAN+BT MiniPci MS-6855B
Optic Toshiba-Samsung SN-W082B
Windows XP Pro x64
Logged
MSI News            MSI News            MSI News
MSI Whitebook M635 (MS-1029) ; AMD Turion MT40 2.2GHz ; Windows XP Pro x64 SP2
MSI Wind Netbook U270-086NL (MS-1245) ; W7 HP x64 ; Linux XFCE 4.8
FAH: 2x MSI N9800GTX-T2D512 ; AMD Phenom 9750 ; INTEL Q9450 ; INTEL E8400

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #12 on: 03-March-06, 13:43:12 »

well i got ahold of msi dl'd core center 64 bit. and this one actually installed.

but my mother board is not supported.

the last revision they made to the corecenter 64bit version was on 8,5,05

Allthough i did get a 64 bit version of pc alert that works on my system.

finally.
Logged

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #13 on: 09-March-06, 14:30:19 »

Update after a week or so of corespondence MSI is going to look into the problem of corecenter not working with msi diamond plus motherboards running 64 OS.

on a side note pc alert and corecent conflict you can choose one or another. but not both.

I've sent them screenshots, errors, and all the junk i can I'm going to keep track of it. they asked me to check back in regularly to see if they have any updates for me to look at.
Logged

Stu

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 19551
  • Birmingham, UK
    • StuOnline.co.uk
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #14 on: 09-March-06, 18:12:33 »

Quote
on a side note pc alert and corecent conflict you can choose one or another. but not both.

thats common knowledge, and not recommended to do ;-))
Logged
Former moderator and admin, 2004-2012

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #15 on: 09-March-06, 21:30:00 »

It a maybe common for you, but was news to me.  it however did not make either work properly :P

Logged

Grouse

  • Guest
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #16 on: 15-March-06, 23:48:02 »

MSI tossed up a new version of corecenter 32 bit/64 bit for msi diamond plus.

Two and a half weeks with suportcenter and they get it all cleared up.  That's pretty darned good turn around for bleeding edge. IMHO.

http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=710&kind=1
Logged

wiak

  • SERGEANT
  • *****
  • Offline Offline
  • Posts: 36
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #17 on: 29-September-07, 19:11:36 »

Speedfan should work in most windows including x64 so dont need anything else
http://www.almico.com/speedfan.php
Logged
Blog https://nwgat.ninja
MSI B350I PRO AC
AMD Ryzen 1500X with Radeon RX 560 4GB
Corsair Vengeance LPX 3200 8GB Kit (2x4GB)
Samsung 840 PRO 256GB
Corsair SF600 600W PSU
Fractal Design Core 500
Windows 10 with probably latest drivers

kistanko

  • PRIVATE E-2
  • **
  • Offline Offline
  • Posts: 1
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #18 on: 22-October-07, 06:37:04 »

Hi Guys!

I have an MSI K8N Master2-Far Mobo, and i tryed to install CoreCenter64 from this forum. The prg. installed, but not started, because not supported.
But! i not close this message box, and in the tray i see the icon. I sad: It works!!! When i open it, i see this:


I think, MSI could make this.
Logged

Ex Forum User 3Topic starter

  • GENERAL OF THE ARMY
  • ******
  • Offline Offline
  • Posts: 23397
Re: Windows X64 Mainboard utils NOT SUPPORTED BY MSI!
« Reply #19 on: 23-October-07, 03:50:08 »

K8N Master uses Core-Center-Pro!!!!
Not the normal version, but there isn't a 64bit version.
Logged
Pages: [1]   Go Up