Please login or register.
Pages: [1]   Go Down

Author Topic: Insufficient extended memory?  (Read 1611 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Insufficient extended memory?
« on: 26-August-05, 23:25:41 »

I am trying to flash my bios - windows me startdisk but when i start the command from the virtual Ram drive it says insufficient extended memory. Should I expand the "extended memory" in some way and what to do to flash my bios

PS i read the forum topics already and also sent a message to tiresmoke but no help so far


  • Guest
« Reply #1 on: 27-August-05, 00:20:38 »

I do noyt give private help as that does not help others.

It sounds like you have the Config.sys file fouled up in a DOS startup disl. Or you are trying to flash using a DOS program in Windows.

Personally my suggest is always to have Live Update create a Bios Flash Diskette. Not to have Live update to flash it for you though. Then use the diskette that was created to boot from. This way you get a disk that will work and that sets up a RAMdisk that you actually flash from.


  • ****
  • Offline Offline
  • Posts: 4050
  • Manchester U.K. Help us help U post specs.
« Reply #2 on: 27-August-05, 00:41:45 »
  • Best Answer

  • Ensure you follow instructions here
    Flashing the BIOS for Users using NON FAT file system
    Visit in step 5) to ensure you have a dos boot that can create a ram drive without issues.

    luck :-))
    Pages: [1]   Go Up