AMD RAID SOP(including A320, X470)

Author Eric Lo on 21 February, 2019 | Print | Bookmark

 1.     Download “AM4 RAID Driver” from official website and put into your USB flash drive


Or copy the “RAID_NVMe” folder from MSI Driver disk(Path: MSI Driver Disk\Storage\AMD\Packages\Drivers\SBDrv\RAID_NVMe) to your USB flash drive.

 

 2.    After complete the BIOS settings in BIOS\Intel(R) Rapid Storage Technology(Please refer to P.110 in the manual). Get into windows 10 installation disk and choose “Load driver”.


 

  3.   Choose AM4_RAID_Driver\AMD 9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_bottom\WT64A then click “Next”.

 

 

  4.   System would show: “AMD-RAID Bottom Device(C:\AM4_RAID_Driver\AMD 9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_bottom\WT64A)”, please choose the first one and click “Next”.


 

  5.    Then system would show “We couldn’t find any drives. To get a storage driver, click Load driver” message. Please click “Load driver” again and get into AM4_RAID_Driver\AMD 9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_driver\WT64A, then click “OK” and “Next”.

 

 

  6.   The system would show “AMD-RAID Controller[storport](AM4_RAID_Driver\AMD 9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_driver\WT64A)”, please choose it and click “Next”.


 

  7.  The system would recognize the RAID volume finally(Kingston SA1000m8/240g M.2 x2 pcs).


Was this article helpful?

Yes No

Last updated on 24 February, 2020 with 1946 views